膨胀型Fire-retardant coating
KF-FR100 Intumescent Fire Retardant Paint
KF-FR100 intumescent fireproof coating uses APP/PER/MEL as the P-C-N intumescent flame retardant system. When exposed to fire, the coating expands 50-80 times to form a carbonized insulating layer that keeps the substrate temperature below the critical value. It is widely used for fire protection of combustible substrates such as wood/cables/plastics and steel structures.
ProductsOverview
Intumescent fireproof coating is a special fireproof coating developed by KeXin New Material. Designed according to GB 14907 and ISO 834 standards, the coating expands in a fire to form a dense carbonized layer, effectively blocking heat conduction and buying valuable time for personnel evacuation and fire rescue.
The product has passed national fire protection 3C certification and UL international certification, with fire resistance limit of 1-3 hours. Suitable for steel structures, concrete structures, cables and other buildings and industrial facilities requiring passive fire protection.
Why choose intumescent fire-retardant coatings?
CoreAdvantages
P-C-N Intumescent Flame Retardant System
A classic intumescent flame retardant system of ammonium polyphosphate (APP/acid source) + pentaerythritol (PER/carbon source) + melamine (MEL/gas source). When exposed to fire, APP releases phosphoric acid to catalyze PER dehydration into char, and MEL releases inert gas to expand the carbon layer, forming a thermal conductivity<0.1W/(mK)的Thermal Insulation层。
Fire protection across multiple substrates
Combustible building materials such as wood/plywood/density board. Fire protection for cables/cable trays. Steel structures (in combination with epoxy fireproof coating). Fire protection for plastic pipes and plastic products. Fireproof coating for tunnels and underground spaces.
Finishing Fire Protection · Both Aesthetics and Safety
Water-based intumescent fireproof coating forms a smooth white or color-adjustable coating after drying. Water-based topcoat can be applied for decoration without affecting fire performance. Suitable for indoor wooden structures and public spaces that require both fire protection and decorative effects.
Professional coating technology support services
Kexin boasts an experienced coatings R&D and application technology team, providing comprehensive services from substrate analysis, coating selection, and process parameter optimization to on-site application guidance. We work in conjunction with our clients' coating production lines to fine-tune coating application parameters, ensuring optimal coating quality and production efficiency.
Eco-compliant green manufacturing system
All products are RoHS/REACH certified and meet national environmental standards for VOC content. Water-based and high-solids, low-VOC formulations are continuously iterated to meet increasingly stringent environmental protection requirements. Environmental performance test reports from authoritative third-party testing institutions such as SGS and CTI are provided.
Complete quality control and batch traceability
A comprehensive quality control system is in place from raw material intake to finished product delivery. Each batch of products undergoes rigorous physical and chemical performance testing and coating simulation testing. Batch numbers are fully traceable, allowing for tracking of raw material origins and production process data. Each product comes with a batch test report and product warranty certificate for customer peace of mind.
TechnicalSpecifications
Basic parameters
Performance
The above technical parameters are from the testing data of Kexin New Materials Laboratory (ISO 17025 certified). Actual values may vary slightly due to construction environment and substrate conditions. For the latest technical data, please contact technical support to obtain the COA test report.
Frequently AskedQuestions
ApplicationProcess
Surface preparation
Thoroughly clean the substrate to remove oil, rust, and oxide scale. Sandblast steel to Sa2.5 grade. Perform surface pretreatment according to product requirements to ensure the substrate is clean. Ambient temperature 5-40°C, relative humidity<85%。
Primer application
Select the primer matched to the coating system and substrate. Mix strictly at the product ratio and control film thickness. Proceed to the next step after the primer dries. Pre-apply reinforcement at critical areas.
Main-coat application
Carry out the main coating application according to process requirements. Strictly control construction parameters such as film thickness/environmental temperature and humidity/flash-off time. Ensure the coating is uniform and consistent with no sagging or pinholes. Manually pre-coat complex areas to ensure full coverage.
Curing process
Bake or air dry at room temperature until fully cured according to product requirements. Maintain a uniform oven temperature (±5°C) and gradually increase the temperature to avoid coating defects. For room temperature curing, ensure adequate ventilation and suitable humidity.
Inspection & acceptance
Inspect DFT, adhesion, gloss, colour deviation and chemical resistance against the relevant standards; issue test report and warranty after full pass, then pack in clean-room conditions.
ApplicationCases
Spray fireproof coating on timber structures
Spray-applied intumescent coating on interior timber — B1 flame-retardant class
Cable fire-retardant coating application
Brushing intumescent coating on cable trays prevents fire from spreading along cables
Steel structure fireproof coating works
Spray intumescent fire protection on interior steel structures
Plywood fire-retardant coating
Roller intumescent fireproofing of decorative plywood in interiors
Tunnel fireproof coating application
Spray intumescent fire protection on tunnel inner linings
Fire-retardant coating for public spaces
Intumescent coating on wood decorative surfaces in public spaces
Coating for wooden fire doors
Intumescent coating on wooden fire doors — certified fire product
Fire-retardant coating for plastic pipes
Intumescent coating on plastic pipes stops flame spread
Theater fire-retardant coating
Intumescent coating on theater stage timber structures
Hotel fire-retardant coating
Fire-retardant coating on wood décor in hotel public areas
Exhibition hall fire-retardant coating
Exhibition hall timber fireproof coating works for fire safety
Fire-retardant coating for historic buildings
Transparent intumescent coating on historic timber structures safeguards cultural relics
Related coatingsRecommended
Steel structure fire-retardant coating
Intumescent · 3h fire resistance · 3C certified
Learn more→
Outdoor thick-film fire protection of steel structures
Thick-film steel structure · Outdoor fireproofing · Durable
Learn more→
Tunnel fire-retardant coating
Tunnel-specific · HC standard · 2h fire resistance
Learn more→
Cable fire-retardant coating
Cable fireproofing · V0 grade · Flame retardant and arc resistant
Learn more→Intumescent Fireproof Coating·Factory direct supply
Kexin supplies intumescent fire-retardant coatings direct from the source factory. Free sample testing, on-site engineer guidance, ISO-certified quality assurance.
Related articles & news
Further reading: technical articles and industry news from Kexin New Materials
- Nanocoating for Electrical Insulation and Fire Protection of EV Battery Packs: A Full-Stack Protection Solution from Thermal Runaway Propagation Mechanisms to Nano Thermal-Insulation Fireproof Systems
- Fire-resistant coatings for steel structures — intumescent and non-intumescent systems
- Rail transit coating systems and safety standards
- Expansion flame-retardant mechanism and engineering application of fireproof coatings
- Industry News