Waterborne alkydcoatings
KF-WI300 Water-Based Alkyd Paint
KF-WI300 waterborne alkyd coating uses waterborne alkyd resin emulsion as the base, is zero-VOC, and uses water as the thinner. The coating dries quickly, has excellent adhesion, and provides rust prevention performance comparable to solvent-based alkyd paint. It is widely used for environmentally friendly rust-preventive coating of general industrial steel structures, mechanical equipment, and metal products. It is an ideal waterborne alternative to solvent-based alkyd paint.
ProductsOverview
Waterborne alkyd coating is a high-performance professional coating product developed and produced by KeXin New Material. It is scientifically formulated with high-quality resin and imported pigments and fillers, offering excellent adhesion, durability, and application performance. It is widely used in industrial manufacturing, architectural decoration, automotive and transportation, and other fields.
As a source coating factory, KeXin New Material strictly implements the ISO9001 quality management system for waterborne alkyd coating from formula design and raw material procurement to production and filling. The product has passed environmental regulation certifications such as ROHS and REACH. We provide free sample testing and on-site guidance by technical engineers.
Why choose waterborne alkyd coatings?
CoreAdvantages
Waterborne alkyd resin for eco-friendly anti-corrosion
Waterborne alkyd resin achieves water dispersibility by introducing hydrophilic groups (-COOH/-SO3H). The drying mechanism is water evaporation + oxidative crosslinking (the same as solvent-based alkyd). The coating's rust prevention performance is comparable to solvent-based alkyd paint, with salt spray >240h. It is the most direct waterborne alternative to solvent-based alkyd paint.
Fast drying and convenient application
Surface drying of waterborne alkyd coating<30min(25°C)Hard dry<6h比Solvent type醇酸快2-3倍。Application Tools清水清洗无需有机solvent。可在轻微Corrosion的SteelSurfaceDirectCoating Application(Rust-converting coating)ReducesSurface preparationcost。
Eco upgrade for general industrial coatings
Steel structure factories, storage racks, metal pipes, mechanical equipment, agricultural machinery. It replaces solvent-based alkyd paint to achieve VOC emission reduction of more than 90%. The cost is lower than waterborne epoxy and waterborne polyurethane, making it the most cost-effective waterborne rust-preventive coating solution.
Professional coating technology support services
Kexin boasts an experienced coatings R&D and application technology team, providing comprehensive services from substrate analysis, coating selection, and process parameter optimization to on-site application guidance. We work in conjunction with our clients' coating production lines to fine-tune coating application parameters, ensuring optimal coating quality and production efficiency.
Eco-compliant green manufacturing system
All products are RoHS/REACH certified and meet national environmental standards for VOC content. Water-based and high-solids, low-VOC formulations are continuously iterated to meet increasingly stringent environmental protection requirements. Environmental performance test reports from authoritative third-party testing institutions such as SGS and CTI are provided.
Complete quality control and batch traceability
A comprehensive quality control system is in place from raw material intake to finished product delivery. Each batch of products undergoes rigorous physical and chemical performance testing and coating simulation testing. Batch numbers are fully traceable, allowing for tracking of raw material origins and production process data. Each product comes with a batch test report and product warranty certificate for customer peace of mind.
TechnicalSpecifications
Basic parameters
Performance
The above technical parameters are from the testing data of Kexin New Materials Laboratory (ISO 17025 certified). Actual values may vary slightly due to construction environment and substrate conditions. For the latest technical data, please contact technical support to obtain the COA test report.
Frequently AskedQuestions
ApplicationProcess
Surface preparation
Thoroughly clean the substrate to remove oil, rust, and oxide scale. Sandblast steel to Sa2.5 grade. Perform surface pretreatment according to product requirements to ensure the substrate is clean. Ambient temperature 5-40°C, relative humidity<85%。
Primer application
Select the primer matched to the coating system and substrate. Mix strictly at the product ratio and control film thickness. Proceed to the next step after the primer dries. Pre-apply reinforcement at critical areas.
Main-coat application
Carry out the main coating application according to process requirements. Strictly control construction parameters such as film thickness/environmental temperature and humidity/flash-off time. Ensure the coating is uniform and consistent with no sagging or pinholes. Manually pre-coat complex areas to ensure full coverage.
Curing process
Bake or air dry at room temperature until fully cured according to product requirements. Maintain a uniform oven temperature (±5°C) and gradually increase the temperature to avoid coating defects. For room temperature curing, ensure adequate ventilation and suitable humidity.
Inspection & acceptance
Inspect DFT, adhesion, gloss, colour deviation and chemical resistance against the relevant standards; issue test report and warranty after full pass, then pack in clean-room conditions.
ApplicationCases
Waterborne alkyd coating for steel-structure factories, general anti-corrosion
Waterborne alkyd spray coating on industrial building steel structures for eco-friendly anti-corrosion
Waterborne alkyd for warehouse racking
Waterborne alkyd coating applied to warehouse racking for general industrial anti-corrosion
Waterborne alkyd for metal pipes
Waterborne alkyd coating on metal pipes as eco-friendly replacement for solvent-borne
Waterborne alkyd for farm machinery
Waterborne alkyd coating applied to farm machinery for outdoor anti-corrosion
Waterborne alkyd for machinery
Waterborne alkyd spray coating on industrial machinery for eco-friendly finishing
Waterborne alkyd for metal guardrails
Waterborne alkyd coating on road metal guardrails for general anti-corrosion
Waterborne alkyd for steel platforms
Waterborne alkyd coating applied to industrial steel platforms
Waterborne alkyd for metal doors and windows
Waterborne alkyd coating on architectural metal doors and windows for decorative anti-corrosion
Waterborne alkyd for storage tank shells
Waterborne alkyd coating applied to the outer walls of small storage tanks
Waterborne alkyd for metal stairways
Waterborne alkyd coating on industrial metal stairways for safe anti-corrosion
Waterborne alkyd for fan housings
Waterborne alkyd spray coating on industrial fan housings
Waterborne alkyd for motor housings
Waterborne alkyd coating on motor housings for equipment anti-corrosion
Related coatingsRecommended
Waterborne epoxy coating
Waterborne Epoxy · Low VOC · Excellent Anti-corrosion
Learn more→
Waterborne polyurethane coating
Waterborne Polyurethane · Weather Resistant · Primer-Topcoat in One
Learn more→Waterborne alkyd coating
Water-based alkyd, fast-drying, economical and versatile.
Learn more→
Waterborne fluorocarbon coating
Waterborne Fluorocarbon · 25-Year Weather Resistance · Eco-Friendly
Learn more→Waterborne Alkyd Coating ·Factory direct supply
KEXIN waterborne alkyd coating supplied directly from the source factory. Free sample testing, on-site guidance from technical engineers, and ISO-certified quality assurance.
Related articles & news
Further reading: technical articles and industry news from Kexin New Materials