ABSPlastic Coatings
KF-AB200 ABS Plastic Coating
KF-AB200 is the most widely applicable general-purpose coating system for ABS substrates. It offers excellent adhesion for both two-component and single-component acrylic and polyurethane systems, achieving a 5B rating in the cross-cut test. It covers a full range of finishes, including high gloss, metallic, and matte effects. It is widely used for coating motorcycle shells, home appliance panels, toy models, and 3C electronic product casings.
ProductsDescripción general
ABS plastic paint is a high-performance professional coating product developed and produced by Kexin New Materials. It is scientifically formulated with high-quality resins and imported pigments and fillers, offering excellent adhesion, durability, and application performance. It is widely used in industrial manufacturing, architectural decoration, automotive transportation, and other fields.
As a source coating factory, Kexin New Materials strictly implements the ISO 9001 quality management system in the formulation design, raw material procurement, and production filling of ABS plastic paint. The products have passed environmental regulations certifications such as ROHS and REACH. Free sample testing and on-site guidance from technical engineers are provided.
¿Por qué elegir pintura para plástico ABS?
NúcleoAdvantages
Optimal adhesion on ABS substrate
ABS contains an acrylonitrile-butadiene-styrene terpolymer structure with moderate surface energy (35-40 mN/m). Acrylic and polyurethane coatings can achieve 5B-level adhesion directly without the need for a primer. The micro-swelling effect of the coating solvent on the ABS surface further enhances physical anchoring.
Cobertura completa de efectos: brillo, metalizado, mate
High-gloss topcoat: 20° gloss >85GU, mirror-level fullness. Metallic flash paint uses ultra-fine aluminum powder/pearl powder to present a flowing metallic texture. Matte topcoat: gloss<10GU高级Matte触感。三种Effect可Meets家电面板/摩托车外壳/玩具模型等不同Aplicación的Appearance品质Requisitos。
Certificación de seguridad y medioambiental de grado juguete
Tested in accordance with EN 71-3 "Safety of Toys – Migration of Certain Elements" and GB 24613 "Limit of Harmful Substances in Coatings for Toys." The coating is free of heavy metals such as lead, cadmium, chromium, and mercury, and does not contain phthalates. A low-VOC water-based system is available. Suitable for safe coating of children's toys and infant products.
Servicio técnico profesional de sistemas de recubrimiento
Kexin boasts an experienced coatings R&D and application technology team, providing comprehensive services from substrate analysis, coating selection, and process parameter optimization to on-site application guidance. We work in conjunction with our clients' coating production lines to fine-tune coating application parameters, ensuring optimal coating quality and production efficiency.
Sistema de fabricación verde conforme a normas ambientales
All products are RoHS/REACH certified and meet national environmental standards for VOC content. Water-based and high-solids, low-VOC formulations are continuously iterated to meet increasingly stringent environmental protection requirements. Environmental performance test reports from authoritative third-party testing institutions such as SGS and CTI are provided.
Control de calidad integral y trazabilidad de lotes
A comprehensive quality control system is in place from raw material intake to finished product delivery. Each batch of products undergoes rigorous physical and chemical performance testing and coating simulation testing. Batch numbers are fully traceable, allowing for tracking of raw material origins and production process data. Each product comes with a batch test report and product warranty certificate for customer peace of mind.
TécnicoSpecifications
Parámetros básicos
Especificaciones de rendimiento
Preguntas Frecuentes -Preguntas
ApplicationProcess
Limpieza del sustrato
Thoroughly remove mold release agents and oil stains from plastic substrates using isopropyl alcohol or a specialized cleaner. For PP and PE substrates, flame treatment or plasma pretreatment can be optionally used to enhance surface energy. For ABS and PC substrates, wipe off dust with an antistatic cloth. Ensure the surface is clean and free of residues.
Aplicación de imprimación
Spray one coat of adhesion primer specifically for plastics. Use CPP chlorinated polypropylene primer for PP substrates. Use PA-specific primer for nylon. For ABS and PC, which have good adhesion, primer can be used optionally. Bake the primer at 60°C for 10 minutes, with a pre-bake film thickness of 10-15 μm.
Aplicación de la capa final
Apply 2 precise coats of topcoat, with a 60°C flash-off for 5-10 minutes between each coat. For the elastic tactile paint, appropriately thicken the final coat to achieve a full rubber-like feel. Total dry film thickness: 30-50μm. After spraying UV paint, pass through a UV curing machine. Ensure uniform color consistency with no runs or sags.
Curing process
Bake at 60-80°C for 20-30 minutes or air-dry at room temperature for 24 hours for complete curing. UV coatings are instantly cured by exposure to a UV curing machine at 800-1200 mJ/cm². Oven temperature uniformity is ±5°C, with gradual heating to avoid coating defects. For plastic substrates, the baking temperature must be controlled to not exceed the substrate's heat deflection temperature.
Inspección y embalaje
After complete curing, use a cross-cut tester to check the adhesion level. Test for gloss/color difference/sweat resistance/cosmetics resistance. Plastic parts require special inspection for solvent attack. QUV yellowing resistance test 500h ΔE.<3。Blando sin polvo Packaging enviado con lote Test Report。
AplicaciónCasos
ABS motorcycle shell coating
ABS motorcycle fairing high-gloss color coating, sporty appearance, dazzling visual impact.
ABS home appliance panel coating
Metal-colored coating for ABS home appliance control panels, high-end home appliance appearance quality
ABS toy model painting
ABS plastic toy model color coating spray EN71 safety standard certification
ABS gaming controller coating
ABS gaming controller shell rubber-feel paint coating for comfortable touch and e-sports experience
ABS speaker housing coating
ABS speaker housing with metallic brushed effect coating for high-end audio equipment appearance
ABS vacuum cleaner shell coating
ABS vacuum cleaner housing, high-gloss color coating, household appliances, aesthetically pleasing and durable.
ABS automotive interior parts coating
Matte coating for ABS automotive interior parts creates a high-end cabin texture.
ABS printer housing coating
ABS printer casing with metallic gray coating for a professional office equipment appearance.
ABS keyboard and mouse coating
UV-cured coating for ABS keyboard and mouse shells, wear-resistant and scratch-resistant.
ABS router shell coating
ABS router shell, white matte coating, network equipment home integration
ABS camera housing coating
ABS camera housing with black rubber-feel paint coating, professional photography equipment texture.
ABS medical device shell coating
Antibacterial coating for ABS medical device shells ensures hygiene and safety of medical equipment.
Recubrimientos relacionadosProductos recomendados
PP polypropylene-specific paint
PP-specific · Flame-free · Excellent adhesion
Más información→Pintura para plástico ABS
ABS plastic paint · Self-drying · Silver powder effect
Más información→
PC scratch-resistant hard coating
PC hard coating · Scratch-resistant · Optical grade
Más información→
Pintura de tacto elástico de goma
Elastic rubber touch · Matte · 3C electronics
Más información→ABS plastic paintVenta directa de fábrica
Pintura plástica ABS Kexin, suministrada directamente de fábrica. Pruebas de muestras gratis, ingenieros in situ, calidad certificada ISO.
artículos y noticias relacionados
Para saber más: artículos técnicos y noticias del sector de Kexin New Materials
- Recubrimiento nano-fluorado de alta gama para cerámica sanitaria con propiedades anti-incrustación y fácil limpieza: de la química de formación de sarro a la ingeniería de superficies de artefactos sanitarios autolimpiables
- Sistema técnico completo de nanorecubrimientos ignífugos y antimoho para cuero de interiores de automóviles: de la ciencia de materiales a la protección de la salud de los ocupantes
- Proceso de pintado y mecanismo de adhesión en piezas de plástico automotivas
- Diseño de formulaciones de recubrimientos plásticos: selección de resinas de pintura (CPO/acrílico/PU) y mecanismos de adhesión (anclaje por hinchamiento/enlace químico) para cinco sustratos plásticos base PP/ABS/PC/PA/PBT
- Noticias del sector