JS Polymer CementRevestimento impermeabilizante
KF-JS300 Polymer Cement Waterproof
KeXin KF-JS300 JS polymer cement waterproof coating uses high-quality acrylate copolymer emulsion and special cement as main raw materials. After two-component on-site mixing, it forms a highly elastic waterproof membrane with interpenetrating network (IPN) structure. It combines the flexibility of polymers (elongation ≥80%) and the durability of cement (bond strength ≥1.0MPa), can effectively cover micro-cracks in the substrate, and bonds firmly to cement surfaces allowing direct tile application. Easy to apply, water-based, environmentally friendly, non-toxic and odorless, it is the preferred material for waterproofing projects in kitchens, bathrooms, balconies, swimming pools, basements, roofs, and other buildings.
ProductsVisão geral
JS polymer cement waterproof coating is a high-performance professional coating product developed and produced by KeXin New Material. It is scientifically formulated with high-quality resins and imported pigments and fillers, featuring excellent adhesion, durability, and application performance. It is widely used in industrial manufacturing, architectural decoration, automotive transportation, and other fields.
As a source coating factory, KeXin New Material strictly implements the ISO9001 quality management system for JS polymer cement waterproof coating from formula design, raw material procurement to production and filling. The product has passed ROHS, REACH and other environmental regulation certifications. Free sample testing and technical engineer on-site guidance services are provided.
Por que escolher o revestimento impermeabilizante polímero-cimento JS?
NúcleoAdvantages
IPN Interpenetrating Network Elastic Waterproofing Technology
Acrylic polymer emulsion and cement hydration products form an interpenetrating network (IPN) structure during the curing process. The polymer phase provides flexibility and extensibility (elongation at break ≥80%), while the cement phase provides strength and durability (bond strength ≥1.0MPa). The two materials interpenetrate and entangle with each other at the nanoscale, achieving a perfect balance between flexibility and strength.
Excelente resistência a fissuras e conformação ao substrato
The coating's elongation at break ≥80% can effectively cover microcracks (≤0.3mm) in the substrate caused by temperature changes and slight settlement. The flexible waterproof membrane expands and contracts with the cement substrate without peeling or shelling. It has good adhesion and deformation-following ability on various substrates such as concrete, brick walls, aerated blocks, and gypsum boards.
Forte aderência em substratos cimentícios — pronto para assentamento
The characteristics of cement-based materials ensure that the waterproof layer forms a dual bond of chemical bonding and mechanical anchoring with the cement mortar leveling layer and tile adhesive. The rough surface of the waterproof layer allows direct tile installation without additional interface treatment. After tiling, the pull-off strength is ≥0.5MPa with no hollowing or tile falling. An integrated solution for waterproofing and tiling on kitchen and bathroom walls.
Water-based and eco-friendly · non-toxic and odorless
Uses water as the dispersion medium, contains no organic solvents or formaldehyde. Passed the GB/T 23445 polymer cement waterproof coating standard and GB 18583 limit of harmful substances in adhesives for interior decoration materials testing. No volatile organic compounds or irritating odors. Suitable for waterproofing construction in kitchens, bathrooms, drinking water tanks, and other areas in close contact with the human body.
Convenient construction · high efficiency
The liquid and powder components are mixed at a 1:1 weight ratio and stirred before use. Can be applied by brushing, rolling, or scraping. Does not sag during vertical application, and a single coat can reach a thickness of 0.5-1.0mm. Construction tools can be cleaned with water. At room temperature of 25°C, it dries to the touch in 2-4 hours, allowing the next coat to be applied. High construction efficiency and short project duration.
Ampla adaptabilidade a obras
The Type II high-elasticity formula is suitable for lightweight walls and steel structure substrates with large deformation. The Type III high-strength formula is suitable for long-term water pressure environments such as basement exterior walls and base slabs. It can be combined with non-woven fabric or fiberglass mesh for reinforcement treatment to meet more demanding waterproofing requirements. It has been applied and verified in batch projects by leading real estate developers such as Vanke, Country Garden, and Poly.
TécnicoSpecifications
Parâmetros básicos
Especificações de desempenho
The above technical parameters are from the testing data of Kexin New Materials Laboratory (ISO 17025 certified). Actual values may vary slightly due to construction environment and substrate conditions. For the latest technical data, please contact technical support to obtain the COA test report.
Perguntas Frequentes -Perguntas
ApplicationProcess
Preparo do substrato
The substrate must be solid, flat, free of oil stains and floating dust. Cracks and holes should be pre-repaired with cement mortar. Internal and external corners should be rounded and chamfered. Concrete walls should be pre-wetted but without standing water. Detail nodes such as pipe roots and around floor drains should be pre-brushed with an additional layer for reinforcement.
Dosagem e mistura
Weigh the liquid and powder at a 1:1 weight ratio. First pour the liquid into the mixing bucket, then slowly add the powder while stirring. Use an electric mixer to stir thoroughly for 3-5 min until a uniform, particle-free slurry is formed. After mixing, let it stand for 2 min for maturation and defoaming before use.
Aplicação de demãos
Apply 2-3 coats using the cross-hatch method to ensure no missed spots. The first coat is 0.5mm as a primer; after 2-4h surface drying, apply the second coat at 0.5-0.7mm; the third coat at 0.5-0.8mm until the design thickness is reached. Use a brush for detailed treatment around pipes and floor drains. For vertical surfaces, apply from top to bottom to prevent sagging.
Cura e proteção
After construction, cure for 24-48h to allow the waterproof layer to fully solidify. During curing, stepping on it and water immersion are strictly prohibited. After complete curing, conduct a 24h water ponding test as specified, with a water depth ≥20mm. No leakage points is considered qualified. Only after passing the water ponding test can the protective layer and tile installation proceed.
Aceitação por etapa
After each coat, check the coating thickness and appearance. No missed coating/no pinholes/no bubbles/no peeling. After the final coating is dry, check the thickness (by slicing or caliper) ≥85% of the design value. 100% inspection of node areas. After passing the water ponding test, sign the concealed works acceptance form before handover.
AplicaçãoCasos
Impermeabilização JS de banheiro
Aplicação de JS polímero-cimento nas paredes e piso do banheiro doméstico: verde, ecológico, atóxico e inodoro
Demão JS de impermeabilização de varanda
Aplicação com rolo de JS na varanda residencial: proteção elástica contra fissuras e vazamentos, pronta para assentamento direto de azulejos.
Impermeabilização de paredes de cozinha
Aplicação com pincel de JS nas paredes da cozinha: forte aderência ao substrato cimentício, assentamento sem vazios.
Revestimento impermeável JS para piscinas
Grande área de JS nas paredes da piscina do condomínio: sem vazamentos sob imersão prolongada, seguro e confiável
Impermeabilização da laje do porão
Aplicação com desempenadeira de JS na laje de concreto do porão: proteção contra umidade pelo lado negativo.
Impermeabilização do telhado-jardim
Camada JS reforçada anti-raízes em coberturas ajardinadas: proteção duradoura contra perfuração de raízes.
Impermeabilização de lagos ornamentais
Impermeabilização JS do tanque da fonte do condomínio: pincelamento fino de formas complexas sem cantos esquecidos
Teste de lâmina d'água da impermeabilização JS do banheiro
Após a membrana JS nos banheiros do hotel: teste de lâmina d'água de 24 h, inspeção de qualidade rigorosa.
Impermeabilização do tanque de água de incêndio
Revestimento JS nas paredes internas dos tanques de incêndio em edifícios altos: padrões de higiene em grau água potável.
Renovação de impermeabilização de cozinha e banheiro em retrofit de prédios antigos
Impermeabilização JS na retrofit de cozinhas/banheiros de condomínios antigos: preparo simplificado do substrato e entrega rápida.
Impermeabilização do poço do elevador
Tratamento anti-infiltração JS no poço do elevador: processo-chave de proteção contra umidade em estruturas enterradas.
Impermeabilização de fontes ornamentais
Impermeabilização JS de fontes ornamentais em praças urbanas: acabamento fino de superfícies curvas sem vazamentos.
Revestimentos relacionadosProdutos recomendados
JS Polymer Cement Waterproofing
Two-component · Elastic waterproofing · Eco-friendly and non-toxic
Saiba mais→
Impermeabilização cristalina capilar cimentícia
Crystalline penetration · Self-healing · Permanent waterproofing
Saiba mais→
Revestimento impermeabilizante acrílico
Roof and exterior wall waterproofing · Elastic crack resistance · Weather resistant
Saiba mais→
Revestimento protetor de polureia
Spray polyurea · Instant dry · Seamless waterproofing
Saiba mais→JS polymer cement waterproof coating·Venda direta da fábrica
A Kexin fornece impermeabilizante polímero-cimento JS direto da fábrica. Teste de amostras gratuito, engenheiro no local e qualidade certificada ISO.
artigos e notícias relacionados
Leia mais: artigos técnicos e notícias do setor da Kexin New Materials