مبدأ وتقنية الطلاء بالتحليل الكهربائي للسيارات (ED): لماذا يتميز الطلاء بالتحليل الكهربائي الكاثودي بقدرة جيدة على منع الصدأ

الأسئلة المتكررة (FAQ)

المزيد من القراءة

• ما هو طلاء السيارات؟التكوين والتصنيف
• تحليل هيكل طلاء الطلاء السيارات
• العملية الأساسية لطلاء السيارات
• اللوائح البيئية لطلاء السيارات VOC
Kexin مواد جديدة • مكتبة تكنولوجيا طلاء السيارات| هذه المقالة تقنية Q& محتوى ، للرجوع إليه في الاختيار والتطبيق

{ "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ {"@type":"Question","name":"Why is electrophoretic coating especially good at rust prevention?","acceptedAnswer":{"@type":"Answer","text":"Electrophoresis uses an electric field to deposit paint evenly, covering even dead spots of spraying such as inner cavities and welds (throwing power), forming a continuous and dense film; cathodic electrophoresis can resist salt spray for up to thousands of hours, so its corrosion protection far surpasses spraying."}}, {"@type":"Question","name":"What is the difference between anodic and cathodic electrophoresis?","acceptedAnswer":{"@type":"Answer","text":"The polarity of the body is different: in anodic electrophoresis the body acts as the anode and metal is easily dissolved out, with average corrosion resistance; in cathodic electrophoresis the body acts as the cathode and the film is denser and more corrosion-resistant, making it the mainstream process in current vehicle factories."}}, {"@type":"Question","name":"How many steps does the electrophoresis process roughly consist of?","acceptedAnswer":{"@type":"Answer","text":"Usually four steps: pre-treatment such as degreasing/phosphating → immerse into the tank liquid and apply current for deposition → ultrafiltration water washing to recover floating paint → bake and cure at about 160–180℃ to form the primer coat."}}, {"@type":"Question","name":"What is the general thickness of the electrophoretic layer?","acceptedAnswer":{"@type":"Answer","text":"The film thickness of whole-vehicle cathodic electrophoresis is usually in the range of 15–30 microns, which is sufficient to provide excellent corrosion protection; too thin fails to prevent rust, too thick may affect the compatibility of subsequent coatings, so it must be controlled according to process standards."}}, {"@type":"Question","name":"Can the electrophoretic layer be partially redone during repair?","acceptedAnswer":{"@type":"Answer","text":"It is difficult. Electrophoresis is a whole-vehicle tank immersion process that cannot be reproduced at the repair end; usually alternatives such as epoxy primer are used for local rust prevention to achieve a similar protective effect."}} ] }

متعلق بقراءة

• نقاط رئيسية لتركيبة دهان مائي مضاد للصدأ: توازن الراتنج، والصبغة المثبطة للتآكل، ومساعد تشكيل الأغشية
• طلاء بودرة مقاوم للبلى: مواد تعبئة صلبة، وآلية التآكل، واختيار النوع حسب ظروف التشغيل
• التعديل النانوي للبلاستيك الخشبي المركب: هندسة الواجهة، وتعزيز الأداء، وتحسين مقاومة الطقس