Electroplated silverMirror paint
KF-EP100 Mirror Silver Paint
KF-EP100 silver mirror paint is a multi-layer system combining ultrafine silver aluminium paste (particle size 5–15 μm, D50 ≈ 10 μm) with a clear binder. The film gives mirror reflectivity comparable to electroplated silver without the heavy-metal waste water of electroplating. It is widely used on bathroom hardware, appliance trim, automotive interiors and crafts.
ProductsOverview
Electroplating Silver Mirror Topcoat is a professional coating product developed by KeXin New Material for the automotive coating industry. It uses imported resins and high-durability pigments, with precisely matched colors and excellent application performance. It is widely used in automotive OEM production lines and aftermarket refinish spraying.
The products meet the standards of OEMs and the needs of the automotive aftermarket repair market, with a gloss level of over 95GU and no significant discoloration after 2000 hours of QUV weathering testing. A complete color matching system and technical support are provided.
Why choose electroplated-silver mirror paint?
CoreAdvantages
Mirror-reflection technology using ultrafine silver aluminium paste
Ultrafine silver aluminium paste (D50 ≈ 10 μm) forms a dense layer of horizontally aligned, coin-shaped aluminium flakes inside the film. Incident light is mirror-reflected from the flake surfaces, producing a metallic gloss comparable to electroplated silver (DOI > 85). Gloss is more than 30% higher than that of conventional aluminium powder paints, reaching the visual effect of electroplated silver.
Eco-friendly replacement for electroplating · zero heavy-metal waste water
Conventional silver electroplating produces waste water containing cyanide, chromate and heavy metals, which is costly to treat and heavily polluting. Silver mirror paint is a solvent-borne coating; the VOC released during application can be destroyed by RTO/RCO incineration, with no heavy-metal waste water discharged. This aligns with the country's increasingly strict environmental policy for the electroplating industry.
Broad substrate compatibility
Delivers an electroplated-silver look on a wide range of substrates such as ABS, PC, PP, metal, glass and ceramic. It is used with the dedicated primer (black or dark-grey primer strengthens mirror contrast) and a clear protective topcoat (non-yellowing polyurethane / UV curing). Well suited to spray coating of irregularly shaped complex parts, with few bare areas and little colour difference.
Professional coating technology support services
Kexin has an experienced coatings R&D and applications team that supports the whole process - substrate analysis, coating selection, optimisation of process parameters and on-site application guidance. Our engineers commission the coating parameters on your own production line so that finish quality and output are both optimised.
Eco-compliant green manufacturing system
All products are RoHS/REACH compliant and their VOC content meets national environmental standards. Waterborne and high-solids low-VOC formulations are continuously refined to keep pace with ever stricter environmental requirements. Environmental performance test reports issued by third-party authorities such as SGS and CTI are available on request.
Complete quality control and batch traceability
A quality-control system covering the whole process, from incoming raw materials to finished-goods dispatch. Every batch undergoes rigorous physico-chemical testing and simulated application trials. Batch numbers are traceable end to end, so raw-material sources and production data can be retrieved. Each shipment is released with a batch test report and a product warranty, so customers can use it with confidence.
TechnicalSpecifications
Basic parameters
Performance
The technical parameters above are taken from test data of the Kexin New Materials laboratory (ISO 17025 accredited); actual values may differ slightly depending on application conditions and substrate. Please contact technical support to obtain a current COA test report.
Frequently AskedFAQ
ApplicationProcess
Surface preparation
Thoroughly clean the substrate surface to remove oil, oxide scale, and mold release agent. Sandblast metal substrates to Sa2.5 grade. Wipe plastic substrates with a specialized cleaner. Sand wood surfaces smooth and repair defects. Remove loose old coatings from existing substrates.
Priming / sealing
Select the appropriate primer or sealer based on the substrate and coating system. The primer enhances topcoat adhesion and seals substrate pores. Strictly mix according to the product ratio and control the film thickness to 10–15 μm. After baking or air drying, inspect the primer for defects before proceeding to the next process.
Topcoat / effect layer application
Apply 2-3 coats of topcoat via precision spraying or manual application. Ensure adequate flash-off between coats and control film thickness to 30-50μm. For artistic effect coatings, use specialized tools such as scrapers, trowels, or sponges to create texture and layering. For metallic flash paint, ensure uniform flash effect in the final coat.
Drying / curing
Bake at the temperature specified by the product requirements or allow to air-dry at room temperature until fully cured. The oven temperature uniformity should be ±5°C, with gradual heating to avoid coating defects. For UV coatings, pass through a UV curing machine at 800-1200 mJ/cm². After curing, allow natural cooling to room temperature before conducting performance testing.
Inspection / protection
After complete curing, test gloss/adhesion/hardness/color difference/chemical resistance. For artistic coatings, check the consistency of texture effects. Once all pass, protect with dust-free materials, package, and ship. Attach batch inspection report and quality certificate.
ApplicationsCases
Mirror-silver coating for bathroom faucets
Bathroom faucets coated with electroplating-look silver mirror paint — an eco-friendly alternative to electroplating
Mirror-silver coating for automotive interior parts
Electroplated-silver mirror paint on automotive interior trim — a premium cabin feel
Mirror-silver coating for appliance panels
Electroplating-look mirror-silver finish on premium appliance panels — a stylish, tech-forward appearance
Mirror-silver coating for cosmetic packaging
Cosmetic packaging caps coated with electroplated-silver mirror paint for a luxury-grade look
Mirror-silver coating for crafts
Electroplated-silver mirror paint on metal gifts and crafts — refined workmanship, environmentally responsible manufacturing
Mirror-silver coating for door handles
Electroplating-look silver mirror paint on interior door handles — a decorative upgrade for architectural hardware
Mirror-silver coating for lighting accessories
Electroplated-silver mirror paint on metal lighting components — a high-end decorative effect for luminaires
Mirror-silver coating for trophies
Electroplated-silver mirror paint on trophy metal parts — premium custom finish for awards and events
Mirror-silver coating for perfume bottle caps
Electroplated-silver mirror paint on metal perfume caps — luxury packaging craftsmanship
Mirror-silver coating for belt buckles
Electroplated-silver mirror paint on fashion belt buckles — metallic decorative effect for accessories
Mirror-silver coating for phone cases
Electroplated-silver mirror paint on phone protective cases — fashionable accessories for consumer electronics
Mirror-silver coating for wheel trim caps
Electroplated-silver mirror paint on wheel trim caps — aftermarket customisation
Related coatingsRecommended
Epoxy zinc-rich primer
Zinc content ≥80% · Salt spray test 3000h · Cathodic protection
Learn more→
Epoxy MIO intermediate coat
Single-channel 150μm · Mica iron oxide shielding · Adhesion ≥5MPa
Learn more→
Fluorocarbon coating
Weather-resistant for 25 years · Self-cleaning and stain-resistant · Maintenance-free
Learn more→
Polysiloxane topcoat
Polysiloxane · UV resistant · Non-chalking
Learn more→Electroplating Silver Mirror Paint·Factory direct supply
Kexin silver mirror paint supplied direct from the factory. Free samples for testing, on-site guidance from application engineers, ISO-certified quality assurance.
Related articles & news
Further reading: technical articles and industry news from Kexin New Materials