Minimum order quantity and shipping time?

Standard products minimum 1kg order, bulk orders 20kg. In-stock products shipped within 48 hours, custom products 3-7 business days. Nationwide logistics available.

How to obtain product samples and technical support?

Contact 400-901-0757 or 13531350189. Our technical engineers provide free selection guidance and sample delivery services.

What quality certifications does the product have?

The product is ISO 9001 quality management certified, ISO 14001 environmental management certified, SGS third-party tested, and compliant with RoHS/REACH environmental standards.

耐化学品·化工专用

高氯化聚乙烯防腐漆

Name: Hc Hcpe Paint | KeXin New Material
Brand: 客信新材料
Availability: InStock

KF-HC100 High Chlorinated PE Anti-Corrosion Paint

KF-HC100高氯化聚乙烯防腐漆以高氯化聚乙烯(HCPE)树脂为基料。涂层耐酸碱盐溶液/耐工业大气/耐水/耐油。单组分快干施工方便。是氯化橡胶涂料的升级替代方案性能更优价格更实惠。广泛用于化工/化肥/冶炼/造纸等重腐蚀工业环境的钢结构防腐涂装。

Get a quote now View technical specifications

9大系列

Full substrate coverage

95GU+

High-gloss paint

5MPa+

Adhesion strength

500h+

Salt spray resistance test

200°C

Baking temperature

ROHS认证

Environmental compliance

ΔE<1

Precision color difference

12月

保质期

源头工厂

Direct supply quality

Product Overview

产品概述

高氯化聚乙烯防腐漆是客信新材料按 ISO12944 标准设计的重防腐涂料。采用优质树脂和高性能防锈颜料科学配制，具有优异的防腐蚀性能和附着力。广泛用于钢结构、桥梁、石化、船舶等重防腐领域的防护涂装。

The product has passed rigorous salt spray testing (>1000h) and adhesion testing (>5MPa), and with a complete base-intermediate-topcoat system, it can provide long-lasting protection for 15-25 years. Kexin provides free coating design solutions and technical support services.

为什么选择高氯化聚乙烯防腐漆？

✓

Zinc content ≥80% · Double protection• Cathodic protection + barrier protection, salt spray >3000h

✓

C5-M, the highest corrosion rating.Verification in extreme environments such as cross-sea bridges and offshore platforms.

✓

On-site technical engineer guidanceFree on-site service within the Pearl River Delta region; remote technical support available for other areas.

✓

48-hour express deliveryRegular products are readily available; custom orders take 3-7 business days.

✓

Provide complete supporting system solutionsMatching base, intermediate, and topcoat designs, one-stop purchasing.

✓

RoHS/REACH environmental compliancePassed SGS/CTI third-party testing, exported to 50+ countries worldwide.

Product Highlights

核心优势

HCPE树脂·化学惰性强

HCPE树脂氯含量大于65%赋予涂层优异的化学惰性和耐腐蚀性。耐35%盐酸/40%硫酸/30%氢氧化钠/饱和盐水长期浸泡。耐强氧化性酸(硝酸/次氯酸)优于氯化橡胶。综合防腐性能是氯化橡胶的升级版。

单组分·施工经济

单组分体系开桶即用不需现场配比固化剂。表干30分钟实干3小时干燥极快适合抢修和翻新工程。固体含量大于45%一道膜厚可达40-50微米盖底力强。价格低于氯化橡胶和环氧涂料。

底面合一·节省工序

对钢铁基材附着力好可在手工除锈St2级表面直接涂装。底面合一两道即可达到防腐要求减少涂层道数。与环氧富锌底漆和环氧云铁中间漆配套可用于更严苛的C4腐蚀环境。

Professional coating technology support services

Kexin boasts an experienced coatings R&D and application technology team that provides a full range of services, from substrate analysis and coating selection to process parameter optimization and on-site construction guidance.

Environmentally compliant green manufacturing system

All products are RoHS/REACH certified and their VOC content meets national environmental standards. Environmental performance test reports from authoritative third-party testing organizations such as SGS and CTI are provided.

Comprehensive quality control and batch traceability

A comprehensive quality control system is in place from raw material intake to finished product delivery. Each batch of products undergoes rigorous physical and chemical performance testing and coating simulation testing. A batch test report and product quality certificate are included with each shipment.

Technical parameters

技术规格

Basic parameters

Applicable substratesFull coverage of multiple substrate types

Coating typeAcrylic/PU/Epoxy/UV

Curing methodBaking/Air Drying/UV Curing

Gloss rangeHighlight/Semi-gloss/Matte

Color optionsPrecise color matching

Applicable industriesWidely used in many industries

Environmental certificationROHS/REACH/GB

Packaging specifications4L/20L drum

Performance indicators

Adhesion (cross-cut test)Level 0-1 (5B)

Pencil hardnessH-2H

耐盐雾240-500h

耐湿热No abnormalities in 500 hours

耐手汗No abnormalities in 48 hours

RCA wear-resistant>200 times

耐冲击50kg·cm

VOC content<420g/L

The above technical parameters are from the testing data of Kexin New Materials Laboratory (ISO 17025 certified). Actual values may vary slightly due to construction environment and substrate conditions. For the latest technical data, please contact technical support to obtain the COA test report.

FAQ

常见问题

Which substrates is it suitable for?+

Suitable for sandblasting and rust removal up to Sa2.5 grade on carbon steel and cast iron surfaces. The substrate must be free of oil, rust, and old paint; a roughness of Rz40-75μm is optimal.

Why can't it be directly exposed to the outside?+

Epoxy resin is not resistant to ultraviolet light and will chalk with prolonged exposure. A complete coating system must be formed by combining an epoxy micaceous iron oxide intermediate coat and a weather-resistant topcoat.

What primers or topcoats are needed?+

We recommend using the same series of primers and topcoats from Kexin to ensure coating system compatibility and optimal performance. Kexin technical engineers can design a complete primer-intermediate-topcoat system solution free of charge based on your specific working conditions.

How can I get samples and a quote?+

Free samples are provided for standard products (shipping costs borne by the customer), along with TDS and MSDS technical data. For bulk purchases, please contact 400-901-0757 or 13531350189. Samples start from 1kg, and bulk orders start from 20kg.

How can I choose the right product model based on my working conditions?+

Choosing the right coating requires comprehensive consideration of the substrate type, operating environment (temperature/humidity/chemical media), corrosion resistance requirements (ISO 12944 C1-C5M), application conditions, and budget. We recommend contacting our technical engineers at 400-901-0757 for professional selection guidance and free sample testing.

Minimum order quantity and delivery time?+

Sample orders start from 1kg, while regular product orders start from 20kg. In-stock products will be shipped within 48 hours, and customized products will take 3-7 business days. Door-to-door delivery is available within the Pearl River Delta region.

Construction Guide

施工流程

Surface treatment

Thoroughly clean the substrate to remove oil and rust. Sandblast steel to Sa2.5 grade. Perform surface pretreatment according to product requirements to ensure substrate cleanliness. Ambient temperature 5-40°C, relative humidity...<85%。

Primer/Pretreatment

Select a suitable primer or pretreatment based on the substrate and product system. Strictly control film thickness by mixing according to the product ratio. Proceed to the next process after the primer has dried. Apply a reinforcing pre-coat to critical areas.

Main coating application

Apply the main coating according to the process requirements. Strictly control application parameters such as film thickness, ambient temperature and humidity, and flash-off time. Ensure a uniform coating free of runs and pinholes.

Curing process

Bake or air dry at room temperature until fully cured according to product requirements. Maintain a uniform oven temperature (±5°C) and gradually increase the temperature to avoid coating defects. For room temperature curing, ensure adequate ventilation and suitable humidity.

Inspection and Acceptance

We test all indicators including film thickness, adhesion, gloss, color difference, and chemical resistance. We conduct comprehensive performance testing according to relevant standards. After all tests pass, we issue a test report and quality assurance certificate, and ship the product in dust-free packaging.

Application scenarios