海上平台重防腐涂料
KF-MC100 Offshore Marine Coating
KF-MC100海上平台重防腐涂料专为C5-M极端海洋腐蚀环境设计。环氧富锌底漆+环氧云铁中间漆+聚硅氧烷/氟碳面漆三重防护体系符合ISO 12944 C5-M和NORSOK M-501标准。广泛用于海上石油平台/风电导管架/FPSO/海底管道等海洋工程钢结构。
产品概述
海上平台重防腐涂料是客信新材料按 ISO12944 标准设计的重防腐涂料。采用优质树脂和高性能防锈颜料科学配制，具有优异的防腐蚀性能和附着力。广泛用于钢结构、桥梁、石化、船舶等重防腐领域的防护涂装。
The product has passed rigorous salt spray testing (>1000h) and adhesion testing (>5MPa), and with a complete base-intermediate-topcoat system, it can provide long-lasting protection for 15-25 years. Kexin provides free coating design solutions and technical support services.
为什么选择海上平台重防腐涂料？
核心优势
ISO 12944 C5-M最高腐蚀等级
C5-M是ISO 12944标准中最高腐蚀等级代表极端海洋环境(高盐雾/高湿度/强紫外线)。涂层体系按C5-M设计经5000h+盐雾和3000h+氙灯老化测试。25年设计防护寿命通过NORSOK M-501挪威海洋工业标准预认证。
三重防护体系
环氧富锌底漆(锌粉含量>80%/阴极保护)+环氧云铁中间漆(片状MIO迷宫效应屏蔽)+聚硅氧烷/氟碳面漆(顶级耐候和耐化学性)。三重防护层层递进每层各司其职形成完整的海工重防腐涂装体系。
聚硅氧烷顶级耐候面漆
聚硅氧烷(Polysiloxane)面漆兼具无机聚硅氧烷的超耐候(QUV>5000h保光率>80%)和有机聚氨酯的柔韧性。不含异氰酸酯环保安全。是海上平台/风电导管架等要求25年以上防护寿命的顶级面漆方案。
Professional coating technology support services
Kexin boasts an experienced coatings R&D and application technology team, providing comprehensive services from substrate analysis, coating selection, and process parameter optimization to on-site application guidance. We work in conjunction with our clients' coating production lines to fine-tune coating application parameters, ensuring optimal coating quality and production efficiency.
Environmentally compliant green manufacturing system
All products are RoHS/REACH certified and meet national environmental standards for VOC content. Water-based and high-solids, low-VOC formulations are continuously iterated to meet increasingly stringent environmental protection requirements. Environmental performance test reports from authoritative third-party testing institutions such as SGS and CTI are provided.
Comprehensive quality control and batch traceability
A comprehensive quality control system is in place from raw material intake to finished product delivery. Each batch of products undergoes rigorous physical and chemical performance testing and coating simulation testing. Batch numbers are fully traceable, allowing for tracking of raw material origins and production process data. Each product comes with a batch test report and product warranty certificate for customer peace of mind.
技术规格
Basic parameters
Performance indicators
The above technical parameters are from the testing data of Kexin New Materials Laboratory (ISO 17025 certified). Actual values may vary slightly due to construction environment and substrate conditions. For the latest technical data, please contact technical support to obtain the COA test report.
常见问题
施工流程
Surface treatment
基材彻底清洁去除油污锈蚀氧化皮。钢材喷砂至Sa2.5级粗糙度Rz40-75μm。铝材酸洗钝化处理。环境温度5-40°C相对湿度<85%。
Primer application
根据涂料体系和基材选择配套底漆。严格按产品比例调配控制膜厚。底漆干燥后进行下道工序。关键工程部位进行预涂和加强处理。
Topcoat application
面漆精密喷涂或辊涂2-3道。每道充分闪干控制膜厚30-50μm。确保颜色均匀一致无流挂针孔。复杂部位手工预涂保证全覆盖。
Curing process
按产品要求烘烤或常温自干完全固化。烘箱温度均匀性±5°C逐步升温。常温固化型保证环境通风和湿度。固化后自然冷却。
Inspection and Acceptance
检测膜厚/附着力/光泽/色差/耐化学品性。按ISO/GB标准进行全面性能检测。全部合格后出具检测报告和质保书无尘包装出货。
应用案例
海上石油平台涂装
海上石油钻井平台环氧富锌+云铁+聚硅氧烷三重防护涂装
海上风电导管架涂装
海上风电基础导管架重防腐涂料施工极端海洋环境保护
FPSO船体涂装
浮式生产储卸油装置船体海工重防腐涂装
海底管道涂装
海底油气管道外壁重防腐涂层深海高压环境防护
海上桥梁涂装
跨海大桥钢结构海工重防腐涂装25年设计寿命
码头钢管桩涂装
港口码头钢管桩重防腐涂料潮差区浪溅区防护
海上风电塔筒涂装
海上风电塔筒内外壁重防腐涂装清洁能源设备保护
钻井船涂装
深海钻井船钢结构重防腐涂装极端工况环境保护
海洋平台生活区涂装
海洋平台生活区外墙聚硅氧烷面漆耐候装饰保护
LNG接收站涂装
LNG接收站码头钢结构海工重防腐涂装
海上机场钢结构涂装
海上机场钢结构重防腐涂装海洋大气环境保护
海底观测网节点涂装
海底观测网节点设备重防腐涂装深海长期保护
Related coatingsProduct Recommendations
Epoxy zinc-rich primer
Zinc content ≥80% · Salt spray test 3000h · Cathodic protection
Learn more→
Polyurethane acrylic topcoat
95GU Gloss · QUV2000h · Color and Gloss Retention
Learn more→
Organosilicon high temperature resistant paint
Organosilicon is heat resistant up to 600℃, does not powder, and does not peel off.
Learn more→
Epoxy self-leveling floor paint
Seamless mirror finish · Abrasion resistant (750g) · Chemical resistant
Learn more→海上平台重防腐涂料·Direct from the source factory
客信海上平台重防腐涂料源头工厂直供。免费样品测试，技术工程师驻场指导，ISO认证品质保障。