Epoxy coal tar anti-corrosion漆
KF-CM100 Epoxy Coal Tar Pitch Coating
KF-CM100 epoxy coal tar anti-corrosion coating is based on epoxy resin and refined coal tar. The coating is water-resistant/salt-resistant/soil microorganism-resistant/plant root penetration-resistant. It is a classic material for anti-corrosion of buried pipelines and underground steel structures. Designed according to SY/T0447 standard with a service life of more than 30 years. Widely used for anti-corrosion coating of long-distance buried oil and gas pipelines/sewage pipelines/steel pipe piles/storage tank bottom plates and other underground and underwater steel structures.
ProductsOverview
Epoxy coal tar anti-corrosion paint is a heavy-duty anti-corrosion coating designed by KeXin New Material in accordance with the ISO 12944 standard. It is scientifically formulated with high-quality resins and high-performance anti-rust pigments, offering excellent anti-corrosion performance and adhesion. It is widely used for protective coating in heavy-duty anti-corrosion fields such as steel structures, bridges, petrochemicals, and ships.
The product has passed rigorous salt spray testing (>1000h) and adhesion testing (>5MPa), and with a complete base-intermediate-topcoat system, it can provide long-lasting protection for 15-25 years. Kexin provides free coating design solutions and technical support services.
Why choose epoxy coal tar anti-corrosion paint?
CoreAdvantages
Coal tar · Naturally water-resistant and anti-corrosion
Refined coal tar contains natural aromatic compounds with excellent water resistance, salt resistance, and microbial resistance. It crosslinks with epoxy resin to form an interpenetrating network structure with adhesion greater than 5MPa. The coating does not soften or peel off during long-term immersion in water and wet soil. Verified by over 30 years of buried application.
Anti-microbial · Anti-root penetration
The coal tar component has natural anti-microbial and anti-plant-root-penetration properties. Resistant to soil corrosion microorganisms such as sulfate-reducing bacteria, iron bacteria, and saprophytic bacteria. Buried pipeline coatings are not penetrated by plant roots. It is an ideal anti-corrosion material for underground steel structures.
Economical thick film · SY/T0447
SY/T0447 standard technical standard for epoxy coal tar anti-corrosion coating of buried steel pipelines. A single coat can reach 150-200 microns in film thickness; ordinary grade is two coats, extra-strong grade is four coats. Used in combination with fiberglass cloth wrapping, it can form reinforced-grade and extra-strong-grade anti-corrosion coatings. The cost per square meter is far lower than 3PE, making it the preferred solution for budget-sensitive projects.
Professional coating technology support services
Kexin has an experienced coating R&D and application team providing full-process support — from substrate analysis, coating selection and process-parameter optimization to on-site application guidance.
Eco-compliant green manufacturing system
All products are certified against the ROHS/REACH environmental regulations and their VOC content meets national environmental standards. Environmental performance test reports issued by authoritative third-party laboratories such as SGS and CTI are provided.
Complete quality control and batch traceability
A full-process quality control system, from incoming raw materials to dispatch of finished goods. Every batch passes rigorous physico-chemical testing and simulated coating trials. Each shipment is released with a batch test report and a product warranty.
TechnicalSpecifications
Basic parameters
Performance
The technical parameters above are taken from test data of the Kexin New Materials laboratory (ISO 17025 accredited); actual values may differ slightly depending on application conditions and substrate. Please contact technical support to obtain a current COA test report.
Frequently AskedFAQ
ApplicationProcess
Surface preparation
Clean substrates thoroughly of oil and rust. Blast steel to Sa2.5. Pre-treat per product spec to keep the substrate clean. Ambient 5-40°C, relative humidity<85%。
Primer / pre-treatment
Select the matching primer or pre-treatment per substrate and system. Mix strictly at the stated ratio and control DFT. Proceed after the primer dries; pre-stripe critical areas.
Main-coat application
Apply the main coat per the process spec, strictly controlling DFT, temperature/humidity and flash-off to keep the film uniform without sagging or pinholes.
Curing process
Cure fully by stoving or by ambient air drying as the product requires. Keep oven temperature uniform within ±5°C and ramp up gradually to avoid coating defects. For ambient-curing grades, ensure adequate ventilation and suitable humidity.
Inspection & acceptance
Inspect all parameters: dry film thickness, adhesion, gloss, colour difference and chemical resistance. Full performance testing is carried out against the relevant standards. Only after everything passes are the test report and warranty issued, and the goods are packed and shipped in dust-free conditions.
ApplicationsCases
Buried pipeline epoxy coal tar
Long-distance buried oil and gas pipeline epoxy coal tar anti-corrosion paint coating with 30-year protection
Sewage pipeline epoxy coal tar
Municipal sewage pipeline epoxy coal tar anti-corrosion paint coating resistant to hydrogen sulfide
Steel pipe pile epoxy coal tar
Epoxy coal tar anti-corrosion paint coating for port and wharf steel pipe piles
Storage tank bottom plate epoxy coal tar
Epoxy coal tar anti-corrosion paint coating for outer wall of large storage tank bottom plate
Underground steel structure epoxy coal tar
Epoxy coal tar anti-corrosion paint coating for underground steel structures
Cooling water pipe epoxy coal tar
Epoxy coal tar anti-corrosion paint for power plant circulating cooling water pipes
Offshore platform epoxy coal tar
Epoxy coal tar anti-corrosion paint coating for offshore platform substructure
Sluice gate epoxy coal tar
Epoxy coal tar anti-corrosion paint for steel gates in water conservancy projects
Epoxy Coal Tar for Docks
Epoxy coal tar anti-corrosion paint for port and dock steel pipe piles and sheet piles
Epoxy Coal Tar for Crossing Pipelines
Epoxy coal tar anti-corrosion paint for directional drilling and pipe jacking crossing pipelines
Epoxy Coal Tar for Steel Jacket Pipes
Epoxy coal tar anti-corrosion paint for central heating steel jacket pipes
Epoxy Coal Tar for Immersed Tube Tunnels
Epoxy coal tar anti-corrosion paint for immersed tube tunnel steel structures
Related coatingsRecommended
Epoxy zinc-rich primer
Zinc content ≥80% · Salt spray test 3000h · Cathodic protection
Learn more→
Polyurethane acrylic topcoat
95GU Gloss · QUV2000h · Color and Gloss Retention
Learn more→
Silicone high-temperature paint
Organosilicon is heat resistant up to 600℃, does not powder, and does not peel off.
Learn more→
Epoxy self-levelling floor coating
Seamless mirror finish · Abrasion resistant (750g) · Chemical resistant
Learn more→Epoxy Coal Tar Anti-Corrosion Paint·Factory direct supply
KeXin Epoxy Coal Tar Anti-Corrosion Paint supplied directly from the source factory. Free sample testing, on-site guidance by technical engineers, ISO-certified quality assurance.
Related articles & news
Further reading: technical articles and industry news from Kexin New Materials