Reflective insulationcoatings
KF-RH100 Reflective Thermal Insulation Coating
KF-RH100 Reflective Heat Insulation Coating is made with specialty hollow microspheres and high-reflectance pigments as functional fillers combined with silicone-acrylic emulsion. Solar reflectance greater than 0.85, hemispherical emissivity greater than 0.88, solar reflectance index SRI greater than 105. In summer, it can reduce roof/exterior wall surface temperature by more than 15 degrees and reduce air conditioning energy consumption by 30-50%. It passes GB/T25261 and JG/T235 building reflective heat insulation coating standards.
ProductsOverview
Reflective Heat Insulation Coating is a high-performance professional coating product developed and produced by KeXin New Material. It is scientifically formulated with premium resins and imported pigments and fillers, offering excellent adhesion, durability, and application performance. It is widely used in industrial manufacturing, architectural decoration, automotive and transportation, and other fields.
As a source coating factory, KeXin New Material strictly implements the ISO9001 quality management system for Reflective Heat Insulation Coating from formula design and raw material procurement to production and filling. The product has passed ROHS, REACH, and other environmental regulation certifications. Free sample testing and on-site guidance by technical engineers are provided.
Why choose a reflective heat-insulation coating?
CoreAdvantages
SRI>105 · Cooling>15 degrees
The dual action of specialty hollow ceramic microspheres and near-infrared reflective pigments. Solar reflectance greater than 0.85, hemispherical emissivity greater than 0.88. Under summer sunlight, the coating surface temperature is more than 15 degrees lower than ordinary gray coatings. It effectively reduces building heat gain and reduces air conditioning cooling energy consumption by 30-50%.
Building Energy Efficiency · Green Certification
It complies with the GB/T25261-2018 standard for reflective heat insulation coatings for buildings and the JG/T235-2014 technical specification for the application of architectural reflective heat insulation coatings. It can help buildings obtain green building evaluation labels and LEED certification. The coating weathers for more than 10 years, and the energy-saving benefits provide a short payback period.
Multi-functional integrated coating system
Integrates four major functions: reflective heat insulation, waterproofing, decoration, and protection. Adhesion greater than 1.0MPa, resistance to artificial aging greater than 1500h. Available in multiple light colors such as white/light gray/light yellow/light blue. Roller coating/spraying construction is simple, with the same construction process as conventional exterior wall coatings.
Professional coating technology support services
Kexin has an experienced coating R&D and application team providing full-process support — from substrate analysis, coating selection and process-parameter optimization to on-site application guidance.
Eco-compliant green manufacturing system
All products are certified against the ROHS/REACH environmental regulations and their VOC content meets national environmental standards. Environmental performance test reports issued by authoritative third-party laboratories such as SGS and CTI are provided.
Complete quality control and batch traceability
A full-process quality control system, from incoming raw materials to dispatch of finished goods. Every batch passes rigorous physico-chemical testing and simulated coating trials. Each shipment is released with a batch test report and a product warranty.
TechnicalSpecifications
Basic parameters
Performance
The technical parameters above are taken from test data of the Kexin New Materials laboratory (ISO 17025 accredited); actual values may differ slightly depending on application conditions and substrate. Please contact technical support to obtain a current COA test report.
Frequently AskedFAQ
ApplicationProcess
Surface preparation
Clean substrates thoroughly of oil and rust. Blast steel to Sa2.5. Pre-treat per product spec to keep the substrate clean. Ambient 5-40°C, relative humidity<85%。
Primer / pre-treatment
Select the matching primer or pre-treatment per substrate and system. Mix strictly at the stated ratio and control DFT. Proceed after the primer dries; pre-stripe critical areas.
Main-coat application
Apply the main coat per the process spec, strictly controlling DFT, temperature/humidity and flash-off to keep the film uniform without sagging or pinholes.
Curing process
Cure fully by stoving or by ambient air drying as the product requires. Keep oven temperature uniform within ±5°C and ramp up gradually to avoid coating defects. For ambient-curing grades, ensure adequate ventilation and suitable humidity.
Inspection & acceptance
Inspect all parameters: dry film thickness, adhesion, gloss, colour difference and chemical resistance. Full performance testing is carried out against the relevant standards. Only after everything passes are the test report and warranty issued, and the goods are packed and shipped in dust-free conditions.
ApplicationsCases
Residential roof reflective insulation coating
Reflective insulation coating applied to residential roofs – lowers indoor temperature and saves electricity
Industrial plant reflective insulation coating
Reflective insulation coating for industrial metal roofs – cooler, energy saving, better working environment
Commercial building reflective insulation coating
Reflective insulation coating for commercial roofs – summer cooling, lower HVAC energy use
Warehouse reflective insulation coating
Reflective insulation coating for large logistics warehouse roofs – protects stored goods
Villa reflective insulation coating
Reflective insulation coating for villa roofs – eco, energy-saving, comfortable living
School reflective insulation coating
Reflective insulation coating for school classroom roofs – cooler, better learning environment
Hospital reflective insulation coating
Reflective insulation coating for hospital roofs – stable temperature, energy saving, dependable
Office building reflective insulation coating
Reflective insulation coating for office roofs – reduces urban heat island effect
Multi-storey car park reflective insulation coating
Reflective insulation coating for multi-storey car-park roofs – shade and cooling
Livestock farming reflective insulation coating
Reflective insulation coating for livestock/poultry housing roofs – improves bird comfort
Gymnasium/arena reflective insulation coating
Reflective insulation coating for large-span metal arena roofs – energy saving
Airport terminal reflective insulation coating
Reflective insulation coating for large airport terminal roofs – building energy saving
Related coatingsRecommended
Exterior wall latex paint
15 years of weather resistance · self-cleaning and stain-resistant · elastic crack bridging
Learn more→
Natural stone-texture paint
95% stone-like effect · natural coloured sand · 20-year durability
Learn more→
Multi-color stone-like paint
Water-in-water technology · lightweight granite imitation · easy to apply
Learn more→
Elastomeric exterior wall coating
Bridges cracks up to 0.5 mm · waterproof yet vapour-permeable · self-cleaning
Learn more→Reflective Heat Insulation Coating·Factory direct supply
Kexin reflective heat-insulation coating, supplied directly from the source factory. Free sample testing, on-site technical engineer support, ISO-certified quality.
Related articles & news
Further reading: technical articles and industry news from Kexin New Materials
- Thermal-Breaking and Cooling Exterior Wall Nano Reflective Insulation Coating: From Solar Radiation Physics to Passive Cooling Solution for Zero-Energy Buildings
- Far-infrared self-insulating nano automotive heat-insulation coating: from infrared physics to the engineering practice of vehicle thermal management
- Technical Principles and Engineering Applications of Thermal Insulation Coatings
- Elastic coating and waterproofing membrane systems: comparison of elongation (>300%), hydrostatic pressure resistance (>0.3 MPa), and application technologies in roofing/basement/tunnel engineering for polyurea/polyurethane/acrylic waterproof coatings
- Industry News