Waterborne aminoBaking Paint
KF-WB100 Water-Based Amino Baking Paint
KF-WB100 waterborne amino baking paint is based on waterborne hydroxy acrylic dispersion and waterborne amino resin. Baked and crosslinked at 140°C for 20 minutes. Coating performance reaches the same level as solvent-based amino baking paint: gloss greater than 90GU / hardness H-2H / adhesion grade 0. VOC less than 80g per liter meets environmental requirements. Widely used for eco-friendly baking paint coating of metal products such as hardware stamping parts / home appliance housings / metal shelves / bottle caps.
ProductsOverview
Waterborne amino baking paint is a high-performance professional coating product developed and produced by KeXin New Material. It is scientifically formulated with high-quality resins and imported pigments and fillers, featuring excellent adhesion, durability, and application performance. Widely used in industrial manufacturing, architectural decoration, automotive transportation, and other fields.
As a source coating factory, KeXin New Material strictly implements the ISO9001 quality management system for water-based amino baking paint from formula design and raw material procurement to production and filling. The products are certified by ROHS, REACH and other environmental regulations. Free sample testing and on-site guidance by technical engineers are provided.
Why choose water-based amino baking paint?
CoreAdvantages
Water-based environmental protection · replaces solvent-based
Using water as thinner, VOC less than 80g per liter, only 1/5 of solvent-based amino baking paint. No odor during application, workshop environment friendly. Certified by ROHS and REACH environmental regulations. Helps manufacturing enterprises achieve coating environmental compliance and green factory construction.
140°C baking · assembly line compatible
140°C 20 minutes baking curing, same baking process as solvent-based amino baking paint. No need to modify existing baking lines and electrostatic spraying equipment. Can directly replace solvent-based amino baking paint without changing coating process parameters. Rich colors, RAL and Pantone full color range supported.
Equivalent performance · no compromise
Gloss greater than 90GU / hardness H-2H / adhesion grade 0 / impact resistance 50kg.cm. Water boiling resistance 2h no change / salt spray resistance greater than 240h. Key performance indicators equivalent to solvent-based amino baking paint. In color vividness and fullness, even exceeds some solvent-based products.
Professional coating technology support services
Kexin has an experienced coating R&D and application team providing full-process support — from substrate analysis, coating selection and process-parameter optimization to on-site application guidance.
Eco-compliant green manufacturing system
All products are certified against the ROHS/REACH environmental regulations and their VOC content meets national environmental standards. Environmental performance test reports issued by authoritative third-party laboratories such as SGS and CTI are provided.
Complete quality control and batch traceability
A full-process quality control system, from incoming raw materials to dispatch of finished goods. Every batch passes rigorous physico-chemical testing and simulated coating trials. Each shipment is released with a batch test report and a product warranty.
TechnicalSpecifications
Basic parameters
Performance
The technical parameters above are taken from test data of the Kexin New Materials laboratory (ISO 17025 accredited); actual values may differ slightly depending on application conditions and substrate. Please contact technical support to obtain a current COA test report.
Frequently AskedFAQ
ApplicationProcess
Surface preparation
Clean substrates thoroughly of oil and rust. Blast steel to Sa2.5. Pre-treat per product spec to keep the substrate clean. Ambient 5-40°C, relative humidity<85%。
Primer / pre-treatment
Select the matching primer or pre-treatment per substrate and system. Mix strictly at the stated ratio and control DFT. Proceed after the primer dries; pre-stripe critical areas.
Main-coat application
Apply the main coat per the process spec, strictly controlling DFT, temperature/humidity and flash-off to keep the film uniform without sagging or pinholes.
Curing process
Cure fully by stoving or by ambient air drying as the product requires. Keep oven temperature uniform within ±5°C and ramp up gradually to avoid coating defects. For ambient-curing grades, ensure adequate ventilation and suitable humidity.
Inspection & acceptance
Inspect all parameters: dry film thickness, adhesion, gloss, colour difference and chemical resistance. Full performance testing is carried out against the relevant standards. Only after everything passes are the test report and warranty issued, and the goods are packed and shipped in dust-free conditions.
ApplicationsCases
Water-based metal baking paint coating
Hardware stamping parts water-based amino baking paint coating assembly line electrostatic spraying
Water-based home appliance shell baking paint
Household appliance metal shell water-based baking paint coating environmental replacement of solvent-based
Water-based Shelf Baking Paint
Water-based baking paint coating for metal storage shelves, batch dip coating
Water-based Bottle Cap Baking Paint
Water-based baking paint coating for beverage bottle caps and cosmetic caps, food safety
Water-based Hardware Tool Baking Paint
Water-based baking paint coating for hardware tools, sweat resistance and corrosion resistance
Water-based Auto Parts Baking Paint
Water-based baking paint coating for automotive metal parts, salt spray resistance
Water-based Office Furniture Baking Paint
Water-based baking paint coating for metal office furniture, matte texture
Water-based Toy Baking Paint
Water-based baking paint coating for metal toys and models, child safety
Waterborne Baking Paint for Lighting Fixtures
Heat-resistant waterborne baking paint coating for metal lighting fixture housings
Waterborne Baking Paint for Door Locks
Wear-resistant waterborne baking paint coating for metal door locks and handles
Waterborne Baking Paint for Bicycles
Bright-colored waterborne baking paint coating for bicycle metal parts
Waterborne Baking Paint for Electromechanical Housings
Industrial protective waterborne baking paint coating for electromechanical equipment metal housings
Related coatingsRecommended
Aluminum-alloy baked paint
Aluminum alloy with baked enamel finish; Hardness 2H; Outdoor weather resistant.
Learn more→
Zinc-alloy baked paint
Zinc alloy paint - strong adhesion - mirror finish
Learn more→
High-gloss metallic baked paint
High-gloss metallic paint · Gloss > 95 GU
Learn more→
Coating for stainless-steel surfaces
Stainless steel coating, passivation, fingerprint resistant
Learn more→Waterborne Amino Baking Paint·Factory direct supply
KeXin New Material waterborne amino baking paint direct from source factory. Free sample testing, on-site guidance by technical engineers, ISO-certified quality assurance.
Related articles & news
Further reading: technical articles and industry news from Kexin New Materials