Tank interior wallLining coating
KF-CT100 Tank Lining Coating
KF-CT100 storage tank interior lining coating is based on Novolac phenolic epoxy resin, featuring high crosslink density, oil resistance and chemical resistance. It is designed according to GB 50156 for double-wall tanks at gas stations and API RP 1631 storage tank lining standards. It is widely used for interior anti-corrosion lining of double-wall tanks at gas stations/chemical storage tanks/oil depots/ship oil tanks.
ProductsOverview
Storage tank interior lining coating is a high-performance professional coating product developed and produced by KeXin New Material. It is scientifically formulated with high-quality resins and imported pigments and fillers, featuring excellent adhesion, durability and application performance. It is widely used in industrial manufacturing, architectural decoration, automotive and transportation, and other fields.
As a source coating factory, KeXin New Material strictly implements the ISO9001 quality management system for storage tank interior lining coatings, from formula design and raw material procurement to production and filling. The products are certified under environmental regulations such as ROHS and REACH. We provide free sample testing and on-site guidance services by technical engineers.
Why choose a storage tank interior lining coating?
CoreAdvantages
Novolac phenolic epoxy · ultra-high crosslink density
Novolac phenolic epoxy contains 2.5-3 epoxy groups per molecule, and its crosslink density is 1.5 times that of ordinary epoxy. The coating is dense and pore-free, providing excellent resistance to refined oils such as gasoline/diesel/ethanol gasoline/MTBE. No swelling or softening after 12 months of immersion.
Gas station double-wall tank lining standard
Designed in accordance with GB 50156 "Code for Design and Construction of Automobile Gasoline and Gas Filling Stations" and the American API RP 1631 storage tank lining standard. Passed the UL 1316 standard for glass fiber reinforced plastic underground storage tanks. It is the designated lining material for double-wall tank renovation at gas stations (adding a lining to single-wall tanks).
Fully compatible with chemicals and petroleum products
Resistant to 98#/95#/92# gasoline/0# diesel/ethanol gasoline (E10/E85)/aviation kerosene/crude oil/lubricating oil. Resistant to aromatics and oxygenated additives such as benzene/toluene/xylene/MTBE. Resistant to acidic crude oil (containing H2S) and alkaline cleaning solutions.
Professional coating technology support services
Kexin has an experienced coatings R&D and applications team that supports the whole process - substrate analysis, coating selection, optimisation of process parameters and on-site application guidance. Our engineers commission the coating parameters on your own production line so that finish quality and output are both optimised.
Eco-compliant green manufacturing system
All products are RoHS/REACH compliant and their VOC content meets national environmental standards. Waterborne and high-solids low-VOC formulations are continuously refined to keep pace with ever stricter environmental requirements. Environmental performance test reports issued by third-party authorities such as SGS and CTI are available on request.
Complete quality control and batch traceability
A quality-control system covering the whole process, from incoming raw materials to finished-goods dispatch. Every batch undergoes rigorous physico-chemical testing and simulated application trials. Batch numbers are traceable end to end, so raw-material sources and production data can be retrieved. Each shipment is released with a batch test report and a product warranty, so customers can use it with confidence.
TechnicalSpecifications
Basic parameters
Performance
The technical parameters above are taken from test data of the Kexin New Materials laboratory (ISO 17025 accredited); actual values may differ slightly depending on application conditions and substrate. Please contact technical support to obtain a current COA test report.
Frequently AskedFAQ
ApplicationProcess
Surface preparation
Clean substrates thoroughly of oil and rust. Blast steel to Sa2.5. Pre-treat per product spec to keep the substrate clean. Ambient 5-40°C, relative humidity<85%。
Primer / pre-treatment
Select the matching primer or pre-treatment per substrate and system. Mix strictly at the stated ratio and control DFT. Proceed after the primer dries; pre-stripe critical areas.
Main-coat application
Apply the main coat per the process spec, strictly controlling DFT, temperature/humidity and flash-off to keep the film uniform without sagging or pinholes.
Curing process
Cure fully by stoving or by ambient air drying as the product requires. Keep oven temperature uniform within ±5°C and ramp up gradually to avoid coating defects. For ambient-curing grades, ensure adequate ventilation and suitable humidity.
Inspection & acceptance
Inspect all parameters: dry film thickness, adhesion, gloss, colour difference and chemical resistance. Full performance testing is carried out against the relevant standards. Only after everything passes are the test report and warranty issued, and the goods are packed and shipped in dust-free conditions.
ApplicationsCases
Gas station double-wall tank lining works
Spray-applied epoxy lining retrofit of underground fuel storage tanks at gas stations
Chemical tank interior lining
Novolac phenolic epoxy lining on chemical tank interiors
Oil depot storage tank lining
Epoxy lining on oil depot storage tank interiors for corrosion protection
Ship bunker tank interior lining
Oil-resistant, anti-corrosion epoxy lining on ship fuel tank interiors
Diesel tank lining
Long-term immersion protection with epoxy lining on diesel storage tank interiors
Ethanol-gasoline tank lining
Ethanol-blend gasoline mixing tank lining resists oxygenate additives
Aviation kerosene tank lining
Aviation kerosene tank interior lining compatible with jet fuel
Lube oil tank lining
Oil-resistant, anti-corrosion epoxy lining on lube oil tank interiors
Sour crude oil tank lining
Sour crude tank lining resists acid and sulfur
Styrene tank lining
Styrene monomer tank lining, solvent-resistant epoxy coating
Industrial wastewater tank lining
Epoxy lining on industrial wastewater collection tank interiors
Fire water tank lining
Drinking-water-safe epoxy lining on fire water tank interiors
Related coatingsRecommended
Epoxy Glass-flake Coating
Scale shielding, chemical resistance, tank lining
Learn more→
Tank lining coating
Storage tank lining · Resistant to strong acids and alkalis · Heavy-duty anti-corrosion
Learn more→
Epoxy coal tar pitch anticorrosion paint
Specially designed for buried pipelines; salt and alkali resistant; long-lasting corrosion protection.
Learn more→
Heavy-duty anti-corrosion coating system
Heavy-duty anti-corrosion system · Primer intermediate topcoat · 15-25 years
Learn more→Storage tank inner wall lining coating·Factory direct supply
KEXIN tank interior lining coating supplied directly from the source factory. Free sample testing, on-site guidance from technical engineers, and ISO-certified quality assurance.
Related articles & news
Further reading: technical articles and industry news from Kexin New Materials