汽车原厂漆
KF-OE100 Automotive OEM Coating
KF-OE100汽车原厂涂料全体系包含阴极电泳底漆(CED)/水性中涂底漆/水性底色面漆/2K高固含清漆。满足汽车OEM涂装线的全自动化生产要求。涂层外观达到汽车A级表面标准(DOI>85)。广泛用于乘用车/商用车的原厂涂装。
产品概述
汽车原厂漆是客信新材料为汽车涂装行业研发的专业涂料产品。采用进口树脂和高耐久颜料，颜色精准匹配，施工性能优异。广泛用于汽车 OEM 生产线和售后修补喷涂。
The products meet the standards of OEMs and the needs of the automotive aftermarket repair market, with a gloss level of over 95GU and no significant discoloration after 2000 hours of QUV weathering testing. A complete color matching system and technical support are provided.
为什么选择汽车原厂漆？
核心优势
汽车OEM全涂装体系
从预处理(CED阴极电泳底漆)到中涂(水性中涂)到底色(水性面漆)到罩光(2K高固含清漆)的完整OEM涂装体系。各层之间层间附着力优异配套性经过充分验证。满足汽车OEM涂装线的高节拍(60-90JPH)自动化生产要求。
水性中涂+水性面漆环保体系
水性中涂底漆VOC<150g/L水性底色面漆VOC<200g/L。满足欧盟和中国日益严格的VOC排放法规。涂层外观品质达到溶剂型体系同等水平。配合机器人静电旋杯喷涂确保膜厚均匀性和颜色一致性。
汽车A级表面标准(DOI>85)
2K高固含清漆(Dual Clear)采用丙烯酸+氨基树脂+异氰酸酯三元固化体系。DOI鲜映性>85达到汽车A级表面标准。橘皮指数<5(长波)/<15(短波)。涂层耐候QUV 2000h保光率>85%满足汽车10年耐候质保要求。
Professional coating technology support services
Kexin boasts an experienced coatings R&D and application technology team, providing comprehensive services from substrate analysis, coating selection, and process parameter optimization to on-site application guidance. We work in conjunction with our clients' coating production lines to fine-tune coating application parameters, ensuring optimal coating quality and production efficiency.
Environmentally compliant green manufacturing system
All products are RoHS/REACH certified and meet national environmental standards for VOC content. Water-based and high-solids, low-VOC formulations are continuously iterated to meet increasingly stringent environmental protection requirements. Environmental performance test reports from authoritative third-party testing institutions such as SGS and CTI are provided.
Comprehensive quality control and batch traceability
A comprehensive quality control system is in place from raw material intake to finished product delivery. Each batch of products undergoes rigorous physical and chemical performance testing and coating simulation testing. Batch numbers are fully traceable, allowing for tracking of raw material origins and production process data. Each product comes with a batch test report and product warranty certificate for customer peace of mind.
技术规格
Basic parameters
Performance indicators
The above technical parameters are from the testing data of Kexin New Materials Laboratory (ISO 17025 certified). Actual values may vary slightly due to construction environment and substrate conditions. For the latest technical data, please contact technical support to obtain the COA test report.
常见问题
施工流程
Surface treatment
基材彻底清洁去除油污锈蚀氧化皮。钢材喷砂至Sa2.5级粗糙度Rz40-75μm。铝材酸洗钝化处理。环境温度5-40°C相对湿度<85%。
Primer application
根据涂料体系和基材选择配套底漆。严格按产品比例调配控制膜厚。底漆干燥后进行下道工序。关键工程部位进行预涂和加强处理。
Topcoat application
面漆精密喷涂或辊涂2-3道。每道充分闪干控制膜厚30-50μm。确保颜色均匀一致无流挂针孔。复杂部位手工预涂保证全覆盖。
Curing process
按产品要求烘烤或常温自干完全固化。烘箱温度均匀性±5°C逐步升温。常温固化型保证环境通风和湿度。固化后自然冷却。
Inspection and Acceptance
检测膜厚/附着力/光泽/色差/耐化学品性。按ISO/GB标准进行全面性能检测。全部合格后出具检测报告和质保书无尘包装出货。
应用案例
乘用车OEM涂装线
乘用车白车身阴极电泳底漆涂装自动化流水线批量生产
机器人静电旋杯喷涂
汽车涂装线机器人静电旋杯水性面漆喷涂高精度自动化
2K清漆机器人喷涂
汽车涂装线2K高固含清漆机器人静电喷涂A级表面
商用车驾驶室涂装
商用车驾驶室OEM电泳+中涂+面漆全体系涂装
SUV车身涂装
SUV车身OEM水性金属闪光面漆涂装珠光效果
汽车零部件OEM涂装
汽车塑料保险杠/后视镜等外饰件OEM涂装
铝合金车身涂装
新能源汽车铝合金车身OEM涂装轻量化配套
客车车身涂装
大型客车车身OEM聚氨酯面漆涂装耐候装饰
皮卡车涂装
皮卡车车身OEM涂装兼顾商乘两用品质
新能源汽车涂装
新能源汽车白车身水性环保OEM涂装体系
MPV商务车涂装
MPV商务车车身OEM高光泽清漆涂装豪华品质
微型电动车涂装
微型电动车车身OEM经济型涂装方案
Related coatingsProduct Recommendations
Automotive epoxy primer
Galvanized steel sheet specific · 500h salt spray · wet-on-wet test
Learn more→
Automotive putty
Quick-drying (30 minutes) · Easy to sand · Does not peel
Learn more→
Automotive intermediate primer
Good filling properties, anti-bite bottom, covers sandpaper marks.
Learn more→
Automotive paint
Color accuracy DeltaE<0.5 · 光泽>95GU
Learn more→Original factory paint for automobilesDirect from the source factory
客信汽车原厂漆源头工厂直供。免费样品测试，技术工程师驻场指导，ISO认证品质保障。