Minimum order quantity and shipping time?

Standard products minimum 1kg order, bulk orders 20kg. In-stock products shipped within 48 hours, custom products 3-7 business days. Nationwide logistics available.

How to obtain product samples and technical support?

Contact 400-901-0757 or 13531350189. Our technical engineers provide free selection guidance and sample delivery services.

What quality certifications does the product have?

The product is ISO 9001 quality management certified, ISO 14001 environmental management certified, SGS third-party tested, and compliant with RoHS/REACH environmental standards.

耐候自洁·建筑防护

外墙乳胶漆

Name: Exterior wall latex paint KF-EW100 | KeXin New Material
Brand: 客信新材料
Availability: InStock

KF-EW100 Exterior Wall Latex Paint

KF-EW100外墙乳胶漆以纯丙/硅丙乳液和进口金红石钛白粉为基料。涂层耐候大于15年耐人工老化大于2000h。自洁抗污雨水自清洁耐沾污小于10%。通过GB/T9755优等品标准广泛用于住宅/商业/公共建筑外墙装饰防护。

Get a quote now View technical specifications

9大系列

Full substrate coverage

95GU+

High-gloss paint

5MPa+

Adhesion strength

500h+

Salt spray resistance test

200°C

Baking temperature

ROHS认证

Environmental compliance

ΔE<1

Precision color difference

12月

保质期

源头工厂

Direct supply quality

Product Overview

产品概述

外墙乳胶漆是客信新材料推出的一款高性能水性环保内墙涂料。以净味苯丙乳液为核心成膜物质，配合进口金红石型钛白粉和环保助剂精制而成。执行 GB/T9756 优等品标准和 GB18582 环保标准。

采用净味零 VOC 技术，涂刷过程中几乎无刺激性气味释放，施工完成后 24 小时即可安全入住。同时具备抗菌防霉功能，特别适合儿童房、医院、学校等对空气质量要求高的场所。

为什么选择外墙乳胶漆？

✓

即刷即住 · 24小时安心入住——零VOC净味配方，告别甲醛焦虑

✓

耐擦洗>20000次 · 十年如新——远超国标优等品标准

✓

On-site technical engineer guidanceFree on-site service within the Pearl River Delta region; remote technical support available for other areas.

✓

48-hour express deliveryRegular products are readily available; custom orders take 3-7 business days.

✓

Provide complete supporting system solutionsMatching base, intermediate, and topcoat designs, one-stop purchasing.

✓

RoHS/REACH environmental compliancePassed SGS/CTI third-party testing, exported to 50+ countries worldwide.

Product Highlights

核心优势

超耐候·15年防护

纯丙硅丙乳液紫外线屏蔽技术涂层耐候大于15年。耐人工老化大于2000h粉化小于1级变色小于2级。经热带/寒带/高原多种气候条件实墙验证。颜色持久鲜艳不褪色长保建筑外观品质。

自洁抗污·雨水即净

涂层表面形成纳米级亲水膜雨水接触角小于30度。雨水在涂层表面均匀铺展冲刷带走灰尘和污染物。耐沾污性小于10%远优于GB/T9755标准中小于20%的要求建筑外观历久弥新。

绿色环保·安全施工

水性配方VOC小于50g/L远低于国标。不燃不爆存储运输无需危化品资质。辊涂/喷涂/刷涂均可施工效率高每工日可涂刷80-100平方米。

Professional coating technology support services

Kexin boasts an experienced coatings R&D and application technology team that provides a full range of services, from substrate analysis and coating selection to process parameter optimization and on-site construction guidance.

Environmentally compliant green manufacturing system

All products are RoHS/REACH certified and their VOC content meets national environmental standards. Environmental performance test reports from authoritative third-party testing organizations such as SGS and CTI are provided.

Comprehensive quality control and batch traceability

A comprehensive quality control system is in place from raw material intake to finished product delivery. Each batch of products undergoes rigorous physical and chemical performance testing and coating simulation testing. A batch test report and product quality certificate are included with each shipment.

Technical parameters

技术规格

Basic parameters

Applicable substratesFull coverage of multiple substrate types

Coating typeAcrylic/PU/Epoxy/UV

Curing methodBaking/Air Drying/UV Curing

Gloss rangeHighlight/Semi-gloss/Matte

Color optionsPrecise color matching

Applicable industriesWidely used in many industries

Environmental certificationROHS/REACH/GB

Packaging specifications4L/20L drum

Performance indicators

Adhesion (cross-cut test)Level 0-1 (5B)

Pencil hardnessH-2H

耐盐雾240-500h

耐湿热No abnormalities in 500 hours

耐手汗No abnormalities in 48 hours

RCA wear-resistant>200 times

耐冲击50kg·cm

VOC content<420g/L

The above technical parameters are from the testing data of Kexin New Materials Laboratory (ISO 17025 certified). Actual values may vary slightly due to construction environment and substrate conditions. For the latest technical data, please contact technical support to obtain the COA test report.

FAQ

常见问题

适用于哪些墙面？+

适用于水泥砂浆墙面、混凝土墙面、腻子墙面、石膏板墙面等常见内墙基材。旧墙翻新需铲除起皮空鼓部分并用腻子修补平整。

一桶（20L）能刷多大面积？+

理论涂布率 8-10 平方米/升/道。20L 装可涂刷 160-200 平方米（一道）。实际用量因墙面粗糙度和施工方式有所不同，建议一底两面。

What primers or topcoats are needed?+

We recommend using the same series of primers and topcoats from Kexin to ensure coating system compatibility and optimal performance. Kexin technical engineers can design a complete primer-intermediate-topcoat system solution free of charge based on your specific working conditions.

How can I get samples and a quote?+

Free samples are provided for standard products (shipping costs borne by the customer), along with TDS and MSDS technical data. For bulk purchases, please contact 400-901-0757 or 13531350189. Samples start from 1kg, and bulk orders start from 20kg.

How can I choose the right product model based on my working conditions?+

Choosing the right coating requires comprehensive consideration of the substrate type, operating environment (temperature/humidity/chemical media), corrosion resistance requirements (ISO 12944 C1-C5M), application conditions, and budget. We recommend contacting our technical engineers at 400-901-0757 for professional selection guidance and free sample testing.

Minimum order quantity and delivery time?+

Sample orders start from 1kg, while regular product orders start from 20kg. In-stock products will be shipped within 48 hours, and customized products will take 3-7 business days. Door-to-door delivery is available within the Pearl River Delta region.

Construction Guide

施工流程

Surface treatment

Thoroughly clean the substrate to remove oil and rust. Sandblast steel to Sa2.5 grade. Perform surface pretreatment according to product requirements to ensure substrate cleanliness. Ambient temperature 5-40°C, relative humidity...<85%。

Primer/Pretreatment

Select a suitable primer or pretreatment based on the substrate and product system. Strictly control film thickness by mixing according to the product ratio. Proceed to the next process after the primer has dried. Apply a reinforcing pre-coat to critical areas.

Main coating application

Apply the main coating according to the process requirements. Strictly control application parameters such as film thickness, ambient temperature and humidity, and flash-off time. Ensure a uniform coating free of runs and pinholes.

Curing process

Bake or air dry at room temperature until fully cured according to product requirements. Maintain a uniform oven temperature (±5°C) and gradually increase the temperature to avoid coating defects. For room temperature curing, ensure adequate ventilation and suitable humidity.

Inspection and Acceptance

We test all indicators including film thickness, adhesion, gloss, color difference, and chemical resistance. We conduct comprehensive performance testing according to relevant standards. After all tests pass, we issue a test report and quality assurance certificate, and ship the product in dust-free packaging.

Application scenarios