High-temperature aluminium flake漆
KF-HS100 High-Temp Aluminum Paint
KF-HS100 High-Temperature Resistant Silver Powder Coating uses silicone resin as the base material and flake aluminum powder as the heat-resistant anti-rust pigment. The coating can withstand temperatures up to 600°C (800°C for short periods). At high temperatures, the aluminum powder reacts with the silicone resin to form a dense aluminosilicate protective layer that continuously provides anti-rust and decorative functions. Widely used for anti-corrosion and decorative coating of high-temperature equipment such as petrochemical pipelines/boilers/chimneys/incinerators/hot blast stoves.
ProductsOverview
High-Temperature Resistant Silver Powder Coating is a high-performance professional coating product developed and produced by KeXin New Material. It is scientifically formulated with premium resins and imported pigments and fillers, offering excellent adhesion, durability, and application performance. Widely used in industrial manufacturing, architectural decoration, automotive and transportation, and other fields.
As a source coating factory, KeXin New Material strictly implements the ISO9001 quality management system for High-Temperature Resistant Silver Powder Coating from formula design, raw material procurement to production and filling. The product has passed ROHS, REACH and other environmental regulation certifications. Free sample testing and on-site guidance by technical engineers are provided.
Why choose high-temperature aluminium paint?
CoreAdvantages
600°C Resistant · Aluminum Powder Reinforced
Silicone resin main chain Si-O-Si bond energy 452kJ/mol, excellent thermal stability. Flake aluminum powder reacts with the resin above 300°C to form an Al-O-Si crosslinked protective layer, further increasing heat resistance to 600°C. The coating does not peel, chalk, or sag at high temperatures, continuously providing a metallic luster decorative effect.
Flake Aluminum Powder · Barrier Anti-Rust
Flake aluminum powder arranges in parallel overlapping layers within the coating to form a labyrinth barrier layer. It blocks oxygen/water vapor/corrosive gas from penetrating to the metal substrate. Salt spray resistance greater than 500h, heat and humidity resistance greater than 1000h. Long-term anti-rust protection solution for high-temperature working conditions.
Room Temperature Self-Drying · Easy Application
Single-component silicone system, room temperature self-drying, ready for use in 24 hours. Spraying/brushing/roller coating all applicable, convenient application. Used in combination with inorganic zinc-rich primer or zinc silicate primer, anti-corrosion performance is doubled. After heat exposure, coating hardness increases and bonding to the substrate becomes stronger.
Professional coating technology support services
Kexin has an experienced coating R&D and application team providing full-process support — from substrate analysis, coating selection and process-parameter optimization to on-site application guidance.
Eco-compliant green manufacturing system
All products are certified against the ROHS/REACH environmental regulations and their VOC content meets national environmental standards. Environmental performance test reports issued by authoritative third-party laboratories such as SGS and CTI are provided.
Complete quality control and batch traceability
A full-process quality control system, from incoming raw materials to dispatch of finished goods. Every batch passes rigorous physico-chemical testing and simulated coating trials. Each shipment is released with a batch test report and a product warranty.
TechnicalSpecifications
Basic parameters
Performance
The technical parameters above are taken from test data of the Kexin New Materials laboratory (ISO 17025 accredited); actual values may differ slightly depending on application conditions and substrate. Please contact technical support to obtain a current COA test report.
Frequently AskedFAQ
ApplicationProcess
Surface preparation
Clean substrates thoroughly of oil and rust. Blast steel to Sa2.5. Pre-treat per product spec to keep the substrate clean. Ambient 5-40°C, relative humidity<85%。
Primer / pre-treatment
Select the matching primer or pre-treatment per substrate and system. Mix strictly at the stated ratio and control DFT. Proceed after the primer dries; pre-stripe critical areas.
Main-coat application
Apply the main coat per the process spec, strictly controlling DFT, temperature/humidity and flash-off to keep the film uniform without sagging or pinholes.
Curing process
Cure fully by stoving or by ambient air drying as the product requires. Keep oven temperature uniform within ±5°C and ramp up gradually to avoid coating defects. For ambient-curing grades, ensure adequate ventilation and suitable humidity.
Inspection & acceptance
Inspect all parameters: dry film thickness, adhesion, gloss, colour difference and chemical resistance. Full performance testing is carried out against the relevant standards. Only after everything passes are the test report and warranty issued, and the goods are packed and shipped in dust-free conditions.
ApplicationsCases
Petrochemical pipe HT aluminium paint
Petrochemical steam piping HT aluminium paint with 600°C protection
Boiler shell HT aluminium paint
Boiler shells coated with HT aluminium paint for high-temperature rust protection and decoration
Chimney HT aluminium paint
Industrial chimney walls with HT aluminium paint for flue-gas duty
Hot-air stove HT aluminium paint
Steel-mill hot-blast stove shells with HT aluminium paint for 800°C radiant heat
Incinerator HT aluminium paint
Waste incinerator outer shell protected against high-temperature oxidation
Engine exhaust pipe aluminium paint
High-temperature aluminium paint on large diesel engine exhaust pipes
Kiln HT aluminium paint
Cement rotary kiln shells HT aluminium paint
Baking oven HT aluminium paint
Industrial baking oven interiors coated with food-safety-grade HT aluminium paint
Thermal oil piping HT aluminium paint
Thermal oil pipe aluminium paint with high-temperature marking
Steam turbine HT aluminium paint
Steam / gas turbine casings HT aluminium paint
BBQ grill HT aluminium paint
High-temperature aluminium paint for commercial BBQ grilles and ovens, food-contact safe
Heat exchanger HT aluminium paint
Shell-and-tube heat exchanger outer shell HT aluminium paint
Related coatingsRecommended
Silicone high-temperature paint
Organosilicon is heat resistant up to 600℃, does not powder, and does not peel off.
Learn more→
Heat-resistant aluminium paint
Temperature resistant up to 400℃ · Silver paint · Special for exhaust pipes
Learn more→
Heat-resistant paint for boilers
Boiler-specific · Temperature resistant up to 500℃ · Oxidation resistant
Learn more→
Ceramic thermal insulation coating
High-performance coatings - Direct from the source factory
Learn more→High-Temperature Resistant Silver Paint·Factory direct supply
KEXIN high-temperature aluminium paint supplied directly from the source factory. Free sample testing, on-site guidance from technical engineers, and ISO-certified quality assurance.
Related articles & news
Further reading: technical articles and industry news from Kexin New Materials