| Product Name | High-Temperature Ceramic Coating KF-HT100 |
|---|---|
| Recommended use | High-temperature ceramic coating is suitable for industrial coating applications in the silicone high-temperature coating category. |
| Use restrictions | For industrial coating use only. Silicone coatings dry slowly at room temperature and usually require baking (200-250°C) to fully cure and achieve optimum performance. Ambient air-dry types perform below baked types. |
| Manufacturer | Kexin New Materials (Guangdong) Co., Ltd. |
| Producer | Foshan Shunde Mingbang Chemical Industry Co., Ltd. |
| Address | No. 19 Shilong Avenue, Xintang Industrial Zone, Lunjiao, Shunde, Foshan, Guangdong |
| Emergency telephone | +86-0757-88793275 |
| Website | https://www.psste.com |
MSDS (Material Safety Data Sheet) – High Temperature Resistant Ceramic Coating KF-HT100
Material Safety Data Sheet · GB/T 16483-2008 · 16 sections in total
1 Identification of the substance / mixture and of the company / undertaking
2 Hazard identification
Signal word: Warning
🔥GHS02
❗GHS07
Hazard Statements
- Flam. Liq. 3: H226 (solventborne)
- Skin Irrit. 2: H315
- Eye Irrit. 2: H319
- STOT SE 3: H336
- Aquatic Chronic 3: H412
Precautionary Statements
- 0: P210
- 1: P261
- 2: P280
- 3: P302+P352
- 4: P305+P351+P338
3 Composition / information on ingredients
| Chemical substance | CAS No. | Concentration range | GHS classification |
|---|---|---|---|
| Silicone resin (Silicone resin, methyl/phenyl polysiloxane) | 67763-03-5 or similar | 20-40% | Non-hazardous substance (polymer); may contain residual solvent. |
| Aluminium paste (leafing/non-leafing) | 7429-90-5 (Al metal) | 10–25% (silver-flake paint type) | Flam. Sol. 1 (H228, dry powder form) — flammability is significantly reduced when used as a paste/coating |
| Xylene / aromatic solvent | 1330-20-7 | 20-40% | Flam. Liq. 3, Acute Tox. 4, Skin Irrit. 2 |
| Heat-resistant pigments (metal oxide / ceramic pigments: Fe₂O₃/TiO₂/Cr₂O₃/CoAl₂O₄, etc.) | Multiple variations | 5-20% | Non-hazardous substance (inert inorganic pigment) |
4 First-aid measures
Inhalation
Move to fresh air. Seek medical attention.
Skin contact
Wash with soap and water.
Eye contact
Rinse for 15 minutes.
Ingestion
Do not induce vomiting. Seek medical attention.
Most important symptoms and effects:Solvent vapour: dizziness and drowsiness. Aluminium paste: mechanical skin/eye irritation.
Conditions requiring immediate medical attention:treat symptomatically.
5 Fire-fighting measures
| Suitable extinguishing media | Dry powder / CO₂ / foam / water mist |
|---|---|
| Unsuitable extinguishing media | |
| Specific hazards | Combustion: CO, CO₂, SiO₂ fumes. Coatings with high aluminium paste content may increase fire intensity. |
| Special protective equipment for firefighters | SCBA |
6 Spill release measures
Operator protection:PPE. Remove ignition sources.
Environmental precautions:Prevent entry into water bodies. Silicone resins are highly persistent in the environment.
Containment and cleaning methods:absorb with absorbent material.
7 Handling and storage
Precautions for safe handling
Well-ventilated areas. Keep away from sources of fire. Silicone coatings usually have low viscosity — prevent sagging.
Storage Conditions
Cool place at 5-30°C. Protect the aluminium paste component from moisture. Storage life: 12 months.
8 Exposure controls / personal protection
| substance | PC-TWA | PC-STEL | Standard |
|---|---|---|---|
| Xylene | 50 mg/m³ | 100 mg/m³ | GBZ 2.1-2019 |
| Aluminium (metal dust / aluminium powder) | 3 mg/m³(total dust,Aluminium metal and oxides) | — | GBZ 2.1-2019 |
Engineering controls
Adequate ventilation + local exhaust.
Personal Protective Equipment (PPE)
| Respiratory system | A/P2 combined half mask |
|---|---|
| Hand protection | Nitrile |
| Eye protection | Safety goggles |
| Skin and body | Standard protective clothing |
9 Physical and chemical properties
| Appearance | Silver-grey (aluminium paste type) / black / various colours |
|---|---|
| Odor | aromatic solvent odor |
| Flash Point | approx. 25-35°C |
| Relative Density | 1.0-1.3 |
| Solubility | Insoluble in water |
| Solids content | 35-55% |
10 Stability and reactivity
| Reactivity | Stable under normal conditions. Silicone resin has excellent thermal stability. |
|---|---|
| Chemical stability | |
| Possibility of hazardous reactions | |
| Conditions to avoid | At high temperatures (>300°C), the uncured coating may smoke or decompose. |
| Incompatible materials | Strong oxidizers. |
| Hazardous decomposition products | Normal use (200-600°C): trace organic volatiles. >500°C: mainly SiO₂. |
11 Toxicological information
Other toxicological information
12 Ecological information
Persistence and degradability
Bioaccumulative potential
Mobility in soil
Other adverse effects
13 Disposal
Disposal method:HW12+HW06. Send for incineration.
Contaminated packaging disposal:
14 Transport Info
| UN No. | UN1263 |
|---|---|
| Proper shipping name | Paint |
| Transport hazard class | Class 3 |
| Packing group | PG III |
| Environmental Hazards | |
| Special precautions |
15 Regulatory Info
Chinese regulations
International regulations
16 Other information
Revision date:2026-06-08
Version:1.0
References
- ECHA Registered Substances Database (echa.europa.eu)
- NIOSH Pocket Guide to Chemical Hazards (cdc.gov/niosh/npg)
- PubChem Compound Database (pubchem.ncbi.nlm.nih.gov)
- GBZ 2.1-2019 Occupational exposure limits for hazardous agents in the workplace — Chemical hazardous agents
- GBZ/T 195-2007 Occupational health management specification for workplaces using organic solvents
- IARC Monographs on the Evaluation of Carcinogenic Risks to Humans
Abbreviations
GHS: Globally Harmonized System of Classification and Labelling of Chemicals; PC-TWA: Permissible Concentration-Time Weighted Average; PC-STEL: Short Term Exposure Limit; OEL: Occupational Exposure Limit; PPE: Personal Protective Equipment; LD₅₀: Lethal Dose 50%; LC₅₀: Lethal Concentration 50%; EC₅₀: Effect Concentration 50%; BCF: Bioconcentration Factor; Kow: Octanol-Water Partition Coefficient; SCBA: Self-Contained Breathing Apparatus; PBT: Persistent, Bioaccumulative and Toxic; vPvB: very Persistent and very Bioaccumulative; COA: Certificate of Analysis
Disclaimer:This MSDS was compiled from public chemical databases such as ECHA, NIOSH and PubChem together with typical industry formulations, and is for reference only. CAS numbers have been verified against public databases. The exact proportion of each component is a core technology secret of the plant, so this document states typical industry concentration ranges. Actual data shall be taken from the plant batch test report and the Certificate of Analysis (COA). Kexin New Materials assumes no legal liability arising from use of the information in this MSDS. Users shall assess the suitability and safety of the product under their own specific conditions of use and comply with all applicable local laws and regulations. This document was compiled in accordance with GB/T 16483-2008 and comprises 16 sections.
⬇ Download this document (PDF)
Related articles & news
Further reading: technical articles and industry news from Kexin New Materials