UV curingWood Coatings
KF-WD300 UV Curable Wood Coating
KF-WD300 UV-curable wood paint cures in seconds under UV irradiation with extremely high production efficiency. Film hardness >2H scratch resistance 100% solid content zero VOC. Widely used in factory automated assembly lines for roller coating or spray UV coating of furniture/flooring/wooden doors.
ProductsOverview
UV-curable wood coatings are wood coatings developed by KeXin New Material adhering to a green and environmentally friendly approach. Using high-quality resins and eco-friendly solvents/water as the medium, they offer high transparency, a full film, a fine feel, and fast drying. They are widely used for coating wood products such as furniture, flooring, and wooden doors.
VOC content is far lower than national standard, passed IKEA ITTC, EU REACH and other international environmental testing, helping enterprises achieve green manufacturing transformation. Provides a full set of wood coating process solutions and on-site technical guidance.
Why choose UV-curable wood coatings?
CoreAdvantages
UV Second-Level Curing for Efficient Production
UV coatings cure in 0.5-2 seconds under ultraviolet light. Combined with automated roller coating/spraying + UV curing production lines, continuous and efficient coating of wood panels can achieve a daily output of 10,000 square meters. Curing energy consumption is only 1/10 that of thermal curing, and production efficiency is increased by dozens of times.
High hardness, scratch-resistant, zero VOC
After curing, the film has a pencil hardness >2H, providing superior scratch resistance. 100% solid content, containing no organic solvents, with zero VOC emissions. The film has good fullness, achieving 20-30μm in a single roller coating. Environmentally friendly and efficient, it is the standard configuration for modern furniture factory coating lines.
Fully automated production-line integration
Complete automated equipment solutions including UV roller coaters (direct/reverse roller/laser roller)/UV spray machines/UV curing machines (mercury lamp/LED). We provide matching and commissioning of UV coatings and equipment as well as process parameter optimization services. Helping furniture factories achieve automation and intelligent upgrading of the coating process.
Professional coating technology support services
Kexin has an experienced coatings R&D and applications team that supports the whole process - substrate analysis, coating selection, optimisation of process parameters and on-site application guidance. Our engineers commission the coating parameters on your own production line so that finish quality and output are both optimised.
Eco-compliant green manufacturing system
All products are RoHS/REACH compliant and their VOC content meets national environmental standards. Waterborne and high-solids low-VOC formulations are continuously refined to keep pace with ever stricter environmental requirements. Environmental performance test reports issued by third-party authorities such as SGS and CTI are available on request.
Complete quality control and batch traceability
A quality-control system covering the whole process, from incoming raw materials to finished-goods dispatch. Every batch undergoes rigorous physico-chemical testing and simulated application trials. Batch numbers are traceable end to end, so raw-material sources and production data can be retrieved. Each shipment is released with a batch test report and a product warranty, so customers can use it with confidence.
TechnicalSpecifications
Basic parameters
Performance
The technical parameters above are taken from test data of the Kexin New Materials laboratory (ISO 17025 accredited); actual values may differ slightly depending on application conditions and substrate. Please contact technical support to obtain a current COA test report.
Frequently AskedFAQ
ApplicationProcess
Surface preparation
Thoroughly clean the substrate surface to remove oil, dust, and old coating. Control wood moisture content within 8-12%. Sandblast metal substrates to Sa2.5 level. Apply 2-3 coats of waterproof putty on flat, dry wall surfaces, sanding smooth between coats. Remove loose old coating and repair defects on existing surfaces.
Priming / sealing
Select a compatible primer or sealer based on the substrate and coating system. Wood sealer prevents resin and pigment bleeding. Metal primer enhances adhesion and prevents rust. Wall sealer prevents substrate water absorption affecting results. Allow primer to dry before proceeding to the next step.
Topcoat / effect layer application
[Product Spec] Topcoat is precisely sprayed or manually applied in 2-3 coats. Each coat is fully flashed off to control film thickness. Artistic effect coatings use special tools such as trowels/float/sponge to create texture and layers. Strictly control the interval time of each coat and the application environment conditions.
Drying / curing
[Product Spec] Bake or air-dry at room temperature to full cure according to product requirements. The oven temperature should be uniform and gradually increased to avoid coating film defects. UV coatings are instantly cured by passing through a UV curing machine. Room-temperature-curing types ensure environmental ventilation and suitable humidity. Naturally cool after curing.
Inspection / protection
After full cure, test gloss, adhesion, hardness, color difference, and chemical resistance. For artistic coatings, inspect texture consistency and overall aesthetics. After all tests pass, package with dust-free protective materials for shipment. Include batch test report and warranty certificate.
ApplicationsCases
UV coating line for furniture
UV-curing roller-coating line for furniture panels — automated, high-volume production
UV coating for solid-wood flooring
UV-curing coating line for solid-wood flooring — high hardness, wear resistance, production
UV coating production line for wooden doors
UV-curing coating automated line for wooden doors — efficient, high-volume
UV coating for MDF
UV roller-coating line for MDF furniture — standardized furniture production
UV coating for cabinet panels
UV-curing coating line for cabinet doors — kitchen-furniture production
UV coating for office furniture
UV roller-coating line for office furniture panels — modern office furniture
UV coating for wood-veneer panels
UV-curing coating for wood-veneer panels — protects the veneer, decorates furniture
UV coating for bamboo flooring
UV-curing coating line for bamboo flooring — eco-friendly bamboo processing
UV coating for wooden crafts
UV spray-curing for wooden crafts — efficient mass production
UV coating for stair treads
UV-curing coating for wooden stair treads — wear-resistant mass production
UV coating for children's furniture
UV roller-coating line for children's furniture panels — eco-friendly, high-volume
UV coating for wood decorative panels
UV-curing coating for interior wood decorative panels — decorative board production
Related coatingsRecommended
waterborne wood coating
Waterborne eco-friendly · Low VOC · Full paint film
Learn more→
UV-curable wood lacquer
UV instant dry · High efficiency production · hardness 3H
Learn more→
NC nitrocellulose wood lacquer
NC fast-drying · easy touch-up · a furniture classic
Learn more→
Natural wood wax oil
[Product Spec] Natural Wood Wax Oil · Eco-friendly · Natural matte
Learn more→UV-curable wood coatings·Factory direct supply
Kexin UV-curable wood coatings supplied direct from the source factory. Free sample testing, on-site guidance from technical engineers, and ISO-certified quality assurance.
Related articles & news
Further reading: technical articles and industry news from Kexin New Materials
- High-end solid wood furniture scratch-resistant, heat-resistant, and anti-fouling nano water-based coating: a green technical solution from microscopic wood protection to furniture surface engineering
- Selection of Solvents in Coatings and Formulation Design
- Types and Functional Modification Technologies of Fillers for Coatings
- Patent Analysis and Technological Innovation Trends in the Coatings Industry
- Industry News