Zinc AlloyBaking Paint
KF-MT200 Zinc Alloy Baking Paint
KF-MT200 is a specialty baking paint system developed for the surface characteristics of die-cast zinc alloy. Paired with a zinc alloy specialty primer, it thoroughly solves adhesion challenges. Widely used for premium surface coating of door handles/locks/bathroom fittings/furniture hardware.
ProductsOverview
Zinc alloy baking paint is a high-performance professional coating product developed and produced by KeXin New Material. It is scientifically formulated with premium resins and imported pigments and fillers, offering excellent adhesion, durability, and application performance. It is widely used in industrial manufacturing, architectural decoration, automotive and transportation, and other fields.
As a source coating factory, KeXin New Material strictly implements the ISO9001 quality management system for zinc alloy baking paint throughout formula design, raw material procurement, and production filling. The product has passed ROHS, REACH, and other environmental regulation certifications. Free sample testing and on-site guidance by technical engineers are provided.
Why Choose Zinc Alloy Baking Paint?
CoreAdvantages
Dedicated Adhesion Solution for Die-Cast Zinc Alloy
The surface of die-cast zinc alloy has micro-porosity and mold release agent residue, resulting in poor coating adhesion. The dedicated primer fills the pores and seals the mold release agent residue to form a uniform coating substrate. The topcoat achieves 5B adhesion, completely solving the industry-wide adhesion challenge in zinc alloy coating.
60°C Ultra-Low Temperature Energy-Saving Curing
An ultra-low temperature curing formula developed for the heat sensitivity of zinc alloy fully cures at 60°C in only 20-30min. It avoids deformation and surface blistering of the zinc alloy substrate caused by high-temperature baking. Energy consumption is reduced by more than 50%, enabling green, environmentally friendly, and efficient production.
Decorative Protection for Bathroom Hardware
Zinc alloy hardware such as door handles/locks/bathroom fittings/furniture pulls that require both decorative appeal and durability. The coating resists hand sweat/detergents/damp heat (85°C/85%RH/500h). High-gloss metallic colors enhance product added value and brand image.
Professional coating technology support services
Kexin has an experienced coatings R&D and applications team that supports the whole process - substrate analysis, coating selection, optimisation of process parameters and on-site application guidance. Our engineers commission the coating parameters on your own production line so that finish quality and output are both optimised.
Eco-compliant green manufacturing system
All products are RoHS/REACH compliant and their VOC content meets national environmental standards. Waterborne and high-solids low-VOC formulations are continuously refined to keep pace with ever stricter environmental requirements. Environmental performance test reports issued by third-party authorities such as SGS and CTI are available on request.
Complete quality control and batch traceability
A quality-control system covering the whole process, from incoming raw materials to finished-goods dispatch. Every batch undergoes rigorous physico-chemical testing and simulated application trials. Batch numbers are traceable end to end, so raw-material sources and production data can be retrieved. Each shipment is released with a batch test report and a product warranty, so customers can use it with confidence.
TechnicalSpecifications
Basic parameters
Performance
The technical parameters above are taken from test data of the Kexin New Materials laboratory (ISO 17025 accredited); actual values may differ slightly depending on application conditions and substrate. Please contact technical support to obtain a current COA test report.
Frequently AskedFAQ
ApplicationProcess
Surface preparation
Thoroughly clean the substrate surface to remove oil, oxide scale, and mold release agent. Sandblast metal substrates to Sa2.5 grade. Wipe plastic substrates with a specialized cleaner. Sand wood surfaces smooth and repair defects. Remove loose old coatings from existing substrates.
Priming / sealing
Select the appropriate primer or sealer based on the substrate and coating system. The primer enhances topcoat adhesion and seals substrate pores. Strictly mix according to the product ratio and control the film thickness to 10–15 μm. After baking or air drying, inspect the primer for defects before proceeding to the next process.
Topcoat / effect layer application
Apply 2-3 coats of topcoat via precision spraying or manual application. Ensure adequate flash-off between coats and control film thickness to 30-50μm. For artistic effect coatings, use specialized tools such as scrapers, trowels, or sponges to create texture and layering. For metallic flash paint, ensure uniform flash effect in the final coat.
Drying / curing
Bake at the temperature specified by the product requirements or allow to air-dry at room temperature until fully cured. The oven temperature uniformity should be ±5°C, with gradual heating to avoid coating defects. For UV coatings, pass through a UV curing machine at 800-1200 mJ/cm². After curing, allow natural cooling to room temperature before conducting performance testing.
Inspection / protection
After complete curing, test gloss/adhesion/hardness/color difference/chemical resistance. For artistic coatings, check the consistency of texture effects. Once all pass, protect with dust-free materials, package, and ship. Attach batch inspection report and quality certificate.
ApplicationsCases
Zinc alloy door handle baking paint
Chrome-effect baked paint for die-cast zinc alloy door handles – high-end architectural hardware with premium texture
Zinc alloy lock baking paint
Baked paint finish for zinc alloy door lock panels – decorative and protective hardware for home security
Zinc alloy bathroom accessories baking paint
Baked paint finish for zinc alloy bathroom faucets – premium bathroom hardware with humidity and heat resistance
Zinc alloy furniture handle baking paint
Baked paint finish for zinc alloy furniture handles – custom decorative hardware accessories for furniture
Zinc alloy lighting baking paint
Zinc alloy lighting accessories baking paint coating for high-end lighting metal texture decoration
Zinc alloy hook baking paint
Zinc alloy hook baking paint coating for bathroom and kitchen storage hardware accessories
Zinc Alloy Photo Frame Baked Paint
Zinc alloy photo frame baked paint coating for home decorations with premium metal texture
Zinc Alloy Trophy Baked Paint
Zinc alloy trophy baked paint coating in gold and silver for event honors, high-end customization
Zinc Alloy Belt Buckle Baked Paint
Zinc alloy belt buckle baked paint coating for fashion accessories, metal decoration, durable
Zinc Alloy Ashtray Baked Paint
Zinc alloy ashtray baked paint coating for business gifts with premium metal texture
Zinc Alloy Candle Holder Baked Paint
Baked paint finish for zinc alloy candlestick holders – high-end home decor in European classical style
Zinc Alloy Perfume Bottle Cap Baked Paint
Baked paint coating for zinc alloy perfume bottle caps – luxury packaging with premium metallic texture
Related coatingsRecommended
Aluminum-alloy baked paint
Aluminum alloy with baked enamel finish; Hardness 2H; Outdoor weather resistant.
Learn more→Zinc-alloy baked paint
Zinc alloy paint - strong adhesion - mirror finish
Learn more→
High-gloss metallic baked paint
High-gloss metallic paint · Gloss > 95 GU
Learn more→
Coating for stainless-steel surfaces
Stainless steel coating, passivation, fingerprint resistant
Learn more→Zinc Alloy Baked Paint·Factory direct supply
KeXin New Material zinc alloy baked paint direct supply from source factory. Free sample testing, on-site guidance by technical engineers, ISO-certified quality assurance.
Related articles & news
Further reading: technical articles and industry news from Kexin New Materials