Inorganic zinc silicatePrimer
KF-IM100 Inorganic Zinc Silicate Primer
KF-IM100 inorganic zinc silicate primer uses ethyl silicate hydrolyzate as binder and ultrafine zinc powder as anticorrosive pigment. The coating has a zinc powder content greater than 85%, providing cathodic protection through sacrificial anode action. Temperature resistance 400 degrees. Widely used as heavy-duty anticorrosive primer for offshore platforms/petrochemical equipment/high-temperature pipelines/storage tanks.
ProductsOverview
Inorganic zinc silicate primer is a heavy-duty anticorrosive coating designed by KeXin New Material according to ISO 12944 standards. It is scientifically formulated with high-quality resin and high-performance anticorrosive pigments, featuring excellent anticorrosion performance and adhesion. Widely used for protective coating in heavy-duty anticorrosion fields such as steel structures, bridges, petrochemicals, and ships.
The product has passed rigorous salt spray testing (>1000h) and adhesion testing (>5MPa), and with a complete base-intermediate-topcoat system, it can provide long-lasting protection for 15-25 years. Kexin provides free coating design solutions and technical support services.
Why choose inorganic zinc silicate primer?
CoreAdvantages
Ethyl silicate inorganic bonding · Zero VOC
Ethyl silicate hydrolyzes and polycondenses to form a Si-O-Si three-dimensional inorganic network. The coating VOC is less than 50g/L, approaching zero VOC. The inorganic binder is UV-resistant, high-temperature resistant up to 400 degrees, and solvent-resistant. The standard primer for offshore platforms and petrochemical high-temperature equipment.
Greater than 85% zinc powder · Strongest cathodic protection
The dry film zinc powder content of the coating is greater than 85%, higher than epoxy zinc-rich. The high zinc powder content ensures good electrical contact between zinc particles and between zinc particles and steel. The sacrificial anode protection effect is stronger and more durable than epoxy zinc-rich. Salt spray greater than 2000h.
Validated on offshore platforms and petrochemical installations
Norwegian North Sea offshore platform inorganic zinc silicate primer verified for over 30 years. Petrochemical high-temperature pipeline 400 degrees inorganic zinc primer. Ship water tanks and ballast tanks inorganic zinc primer. Heavy-duty anticorrosive primer for all steel structures requiring the highest anticorrosion grade.
Professional coating technology support services
Kexin has an experienced coating R&D and application team providing full-process support — from substrate analysis, coating selection and process-parameter optimization to on-site application guidance.
Eco-compliant green manufacturing system
All products are certified to the ROHS/REACH environmental regulations; VOC content meets national environmental standards. SGS/CTI test reports are provided.
Complete quality control and batch traceability
A full-process quality control system, from incoming raw materials to finished-goods dispatch. Every batch undergoes rigorous physico-chemical testing and ships with a batch test report and product warranty.
Professional coating technology support services
Kexin has an experienced coating R&D and application team providing full-process support — from substrate analysis, coating selection and process-parameter optimization to on-site application guidance.
Eco-compliant green manufacturing system
All products are certified to the ROHS/REACH environmental regulations; VOC content meets national environmental standards. SGS/CTI test reports are provided.
Complete quality control and batch traceability
A full-process quality control system, from incoming raw materials to finished-goods dispatch. Every batch undergoes rigorous physico-chemical testing and ships with a batch test report and product warranty.
TechnicalSpecifications
Basic parameters
Performance
The technical parameters above are taken from test data of the Kexin New Materials laboratory (ISO 17025 accredited); actual values may differ slightly depending on application conditions and substrate. Please contact technical support to obtain a current COA test report.
Frequently AskedFAQ
ApplicationProcess
Surface preparation
Clean substrates thoroughly of oil and rust. Blast steel to Sa2.5. Pre-treat per product spec to keep the substrate clean. Ambient 5-40°C, relative humidity<85%。
Primer / pre-treatment
Select the matching primer or pre-treatment per substrate and system. Mix strictly at the stated ratio and control DFT. Proceed after the primer dries; pre-stripe critical areas.
Main-coat application
Apply the main coat per the process spec, strictly controlling DFT, temperature/humidity and flash-off to keep the film uniform without sagging or pinholes.
Curing process
Cure fully by stoving or by ambient air drying as the product requires. Keep oven temperature uniform within ±5°C and ramp up gradually to avoid coating defects. For ambient-curing grades, ensure adequate ventilation and suitable humidity.
Inspection & acceptance
Inspect all parameters: dry film thickness, adhesion, gloss, colour difference and chemical resistance. Full performance testing is carried out against the relevant standards. Only after everything passes are the test report and warranty issued, and the goods are packed and shipped in dust-free conditions.
ApplicationsCases
Polyurea flooring for industrial plants
Two-component spray-applied polyurea industrial floor that cures in seconds for immediate use
Polyurea roof waterproofing
Seamless elastic polyurea waterproofing spray-applied on flat roofs
Polyurea lining for tank interiors
Spray-applied polyurea anti-corrosion tank lining, resistant to chemical immersion
Polyurea waterproofing for water parks
Elastic polyurea waterproofing coating spray-applied on water-park pool bottoms
Polyurea anti-corrosion coating for pipelines
Mechanized spray application of polyurea anti-corrosion coating to the exterior of buried pipelines
Polyurea parking-lot flooring
Spray-applied elastic polyurea floor coating for underground parking, abrasion-resistant and waterproof
Polyurea flooring for chemical plants
Spray-applied polyurea anti-corrosion floor coating for chemical plants, resistant to acids and alkalis
Polyurea insulation and waterproofing for cold storage
Spray-applied polyurea combined insulation and waterproofing coating for cold-store floors
Polyurea for aquaculture ponds
Non-toxic, safe polyurea waterproofing coating spray-applied on aquaculture concrete tanks
Polyurea for wastewater tanks
Spray-applied polyurea anti-corrosion waterproof lining for wastewater tanks
Polyurea waterproofing for bridges
Spray-applied polyurea waterproofing coating on concrete bridge decks
Polyurea for rooftop gardens
Spray-applied root-resistant polyurea waterproofing coating for rooftop gardens
Related coatingsRecommended
Epoxy MIO intermediate coat
Single-channel 150μm · Mica iron oxide shielding · Adhesion ≥5MPa
Learn more→
Polyurethane acrylic topcoat
95GU Gloss · QUV2000h · Color and Gloss Retention
Learn more→Inorganic zinc silicate primer
Temperature resistant up to 400℃ · Marine engineering specific · Inorganic bonding
Learn more→
Direct-to-rust primer
No sandblasting required; can be applied to rust-covered surfaces; saves 60% on costs.
Learn more→Inorganic zinc silicate primer ·Factory direct supply
Kexin inorganic zinc silicate primer supplied direct from the manufacturer. Free sample testing, on-site technical engineer guidance, ISO-certified quality assurance.
Related articles & news
Further reading: technical articles and industry news from Kexin New Materials